How can I get the OIDs from the MIB file? -----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jeff Mcadams Sent: Wednesday, May 03, 2000 12:45 PM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) SNMP question Also sprach David Hamilton
I was going to ask the same question today. I want to retrieve a list of current online users from the hyperarcs.
snmpwalk -R <archostname> <community> usrCipUserName
This didn't work. I have a list of all of the mibs and usrCipUserName isn't in this list. Where did you find this info? Have you verified that it works? If so could you post more info?
Its in a file "hiperarc.mib" that actually contains quite a few mibs, for use with the HiPer Arc's. You *don't* get this information sending the requests to the NMC (well, you *can* get it through the NMC, its just a bit more convoluted to do so :). You need to set up SNMP access on the Arc (or use the NMC as an SNMP relay agent) to be able to access this information. Once you have the Cip-MIB loaded (which is contained in the hiperarc.mib file), then you should be able to access this (usrCipUserName) column of the usrCipPortParamTable. I *believe* the hiperarc.mib file is included with the hiperarc software download zip file, but am not sure on that. If you'd like a copy of the file, I can send it. I'm trying to hit on some of the things that might have caused you a problem...without knowing specifically what you ran into, I can't give you a good answer as to what you're doing wrong. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.