When I plug into the units NMC here is what I get
>
> 3Com
>
> SDL2 Revision: 1.0.05
> BIOS Extension Link Date Aug 25 1998 at 14:13:08
>
> Initiating Op
>
> And it just sits there.
>
> If I plug into the ARC Card I get this.
>
> BOOT PROM Version 1.16 (Built on June 9th, 1998 at 12:24:24)
> Loading kernel ... OK
> Initializing timer ... OK
> Initializing TFTP driver ... OK
> Initializing flash driver ... OK
>
>
>           HiPer Access Router Boot Configuration
>           --------------------------------------
>
>     1.  Boot mode                   :  FLASH
>     2.  IP Configuration Source     :  STATIC
>     3.  Boot IP Interface           :  eth:1
>     4.  Boot IP Address             :  0.0.0.0
>     5.  Boot IP Default Gateway     :  0.0.0.0
>     6.  Boot IP Network Mask        :  0.0.0.0
>     7.  TFTP Image on Startup       :  NEVER
>     8.  TFTP Boot Server IP Address :  0.0.0.0
>     9.  TFTP Boot Image File Name   :
>     10. Crash upload                :  DISABLED
>     11. Crash Dump Upload Filename  :
>     12. Manufacturing Diagnostics   :  NONE
>     13. Delete Router Configuration :
>     14. Delete Boot Configuration   :
>     15. Command Line Parameters     :
>     16. File System Sync Mode       :
>     E.  Exit
>
>                  Enter Choice :   [E] TIMED OUT
>
> Attempting auto-load from Flash ...
> IPX/IP Dial-out networking software is Copyright (c)1985-1996,
>        Network Products Corporation (Pasadena, CA) All rights reserved.
> AppleTalk-compatible networking software is Copyright 1993-1995,
>        Quiotix Corporation (Menlo Park, CA) All rights reserved.
> TCP/IP networking software is Copyright 1988-1995,
>        Epilogue Corporation, Albuquerque NM, All rights reserved.
> IP routing software is Copyright 1993-1995,
>        RainbowBridge Communication. Inc. Rockville MD, All rights
reserved.
> IPX networking software is Copyright 1994-1995,
>        RouterWare Inc. Newport Beach CA, Unpublished - rights reserved
>        under the Copyright Laws of the United States.
> VJ TCP Header Compression software is Copyright (c) 1989, 1991, 1992,
1993,
>        Regents of the University of California. All rights reserved.
>
>
> HiPer, V5.3.110
>     3Com Corporation, Santa Clara, California
> The software contained in this product is
>     Copyright 1997-2001, 3Com Corporation, Santa Clara, California
>     All rights reserved.
>
>
> Starting up the HiPer system Executive...
> Starting up HiPer Configuration process...
>
> HiPer Configuration Process starting......
>
> HiPer Initializing Network Management Processes...
>
> HiPer starting RoboExec NetMan process......
>
> HiPer starting Event Handler process......
>
> HiPer configuring interfaces......
>
> HiPer starting required processes......
>
> HiPer starting Call Initiator process
> HiPer starting Call Initiator process
> HiPer configuring devices in CIP......
>
> HiPer configuring datalink layers......
>
> HiPer configuring networks......
>
> HiPer Adding networks to LAN interfaces....
>
> HiPer enabling networks on LAN interfaces....
>
> Configuring Network Services.....
>
> Starting the CLI......
> Please Wait for Prompt...
>
> Configuring default Network Services (telnet and tftp.....)
> HiPer>> _QuickSetup
> HiPer>> Welcome to the HiPer Quick Setup
>
>
> The HiPer Quick Setup will let you set up simple configuration
> for your whole system or different portions of the system.
>
> Do you want to continue with HiPer Quick Setup?
>
> After this it sits there. Will. not let me do anything..   Do you have any
> Ideas?