On Fri, 28 Jan 2000, Mike wrote:
I have a new DSP card that first of all wouldn't allow me to flash new code to it through TCM, it kept giving a "TFTP error: Access violation" error. So I hooked up to the console port and was able to upload the 2.0.51 code to it. After I reset the card it came up fine and reported the correct software version, but after a couple of hours TCM reports the card failed. I can do a hardware reset and it will be fine for a few more hours, but it will eventually report failed. What can I do to resolve this? Thanks.
Make sure your write community string is correct. It sounds like the issue you are having is more of an NMC issue than a DSP issue. What NMC code? is it a HiperNMC? Is the NMC communities set right? Brian
-- Mike Wilker Director of Network Operations Local Link, Inc.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
----------------------------------------------------- Brian Feeny (BF304) signal@shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.