goes a little something like this .... (version 5.1.99-8 mostly) ... please change the servers! === CONSOLE == add ip net ip address 208.148.192.36/255.255.255.128 inter eth:1 enable y add ip defAULTROUTE gaTEWAY 208.148.192.1 metric 1 add user "administrator" password "XXXXXX" type login,manage enable y disablE nmC chASSIS_AWARENESS set chassis slot 1-14 o y card_type hdm_24 ports 24 console n type static enable secURITY_OPTION rEMOTE_USER_ADMINISTRATION tELNET add snMP community public acCESS ro adDRESS 0.0.0.0 set modem_group all message "" set modem_group all prompt "\nlogin: " disaBLE auTHENTICATION lOCAL set authENTICATION vSA enable set accounTING vsA enable set accountING loG_UNAUTHENTICATED_CALLS enABLED enable ip security_option disallow_source_route_options set commAND logiN_REQUIRED yes set radiUS authENTICATION_ALGORITHM falL_THROUGH add dns server 208.137.128.x preference 1 add dns server 208.137.128.y preference 2 set dns domain_name netdoor.com set ntp primary_server ntp.netdoor.com enable ntp set ppp ccP_MODEMTYPE_ACCEPT all set ppp reCEIVE_AUTHENTICATION pap set ppp DNS_USAGE system set ppp authentication_preference pap enable ppp offloading add ip pool ippool INITIAL_POOL_ADDRESS 208.148.211.1 size 252 route aggregate state public set authentication primary_server 208.137.128.x set authentication secondary_server 208.137.128.x set accounting primary_server 208.137.128.x set accounting secondary_server 208.148.196.x set authentication primary_secret blahblah set authentication secondary_secret blahblah set accounting primary_secret blahblah set accounting secondary_secret blahblah add sysLOG 208.137.128.x aLLOW_ALL_AUTH_LEVELS n faCILITY log_auth logleVEL crITICAL ======================== a Cisco would then route the ARC (208.148.192.36) the network 208.148.211.0/255.255.255.0 in our env GOOD LUCK! Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 ----- Original Message ----- From: "Timothy C. Bohen" <Tim@CMSInter.Net> To: <usr-tc@lists.xmission.com> Sent: Monday, March 12, 2001 9:11 PM Subject: (usr-tc) Transition from Netserver to ARC
I have been using tons of Netserver PRI's in the past and just recently got my first Arc.
I know there is no future in the Netserver so I will continue to get more Arcs, but I have a few issues.
Whats the easiest way to get a Arc up and running? I have a chassis with seven DSP's and just want to do basic dialin access. Assign DNS numbers, assign an address from a pool and authenticate against a RADIUS server.
Thanks.
Timothy C. Bohen CMSInter.Net / Crystal MicroSystems ============================ web : www.cmsinter.net email : Tim@CMSInter.Net phone : 517.235.5100 x22
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.