After you hit the execute button, do you wait until every channel on the card shows "Success" in the result column? If you hit the close button before you get a success back for each channel, the command will fail and you will get calls on some of the channels. At 11:21 AM 1/14/00 +0900, you wrote:
Hi all,
I'm having problems with soft busying HiperDSP cards. It seems that even when I perform the soft busy on every channel, calls are still able to come in on that card. Is there something that I am missing on this concept? Could it be in any way related to the switch type? I'm using INS1500.
HDM -> 1.2.5 HARC -> 4.1.59
Thanks
das
-- ______________________________________________ Alex Substanley Exodus Communications K.K. Engineering Department Das Man TEL: 81-3-5334-1700 Systems Engineer FAX: 81-3-5334-1711 ______________________________________________
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Buzz Gould Information Systems Engineer Rural Connections - a OneMain.com Company www.rconnect.com 507 847-2700 Ext. 6119 buzzg@rconnect.com - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.