So it's just named poorly?
From you explination.. as long as the last 3 values are 0 then the CPU is just not above some threshold set in flash.... OK, next question: what's that value? Or is it safe to say that as long as the values are 0 it's just nothing to worry about?
Thanks Paul Farber Farber Technology farber@admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545 On Thu, 7 Sep 2000, Veda Narayan wrote:
Quoting Paul Farber <farber@admin.f-tech.net>:
historically sho cpu utilization has been broke. On both ARC's I have 4.1.59 and sho cpu util are 0% (with 250+ calls on it!)
No - show cpu is not broken. It shows 0% with 250+ calls is normal. The HiPer arc is designed to show the CPU utilization only when it reaches the level of calls/flash updates/route tables and any other routing related activity exceeds the bench mark. Which basically means you will see show cpu activity instantaneously if you do a save all and do a show cpu at that instance.
What it is that being a embaded system, the HiPer arc CPU is always being utilized, so they have a bench mark, once you exceed the bench mark the cpu utilization shows. Typically for normal call volumes you will not see any cpu utilization, do a lot of l2tp, cleartcp, pptp, calls you will see some utilization.
-V
Paul Farber Farber Technology farber@admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545
On Thu, 7 Sep 2000, Dwayne Varey wrote:
Is there an oid in the new release of code to find the cpu usage of the Harc?
________________________________________________ Dwayne Varey Systems Administrator WestNet - WA's Statewide Internet Provider Phone: 92182600 - Fax: 92182666 http://www.wn.com.au _________________________________________________
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
===========
-V
==========
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.