1.3.6.1.4.1.429.4.2.1.10.0 to get the ports used off a hiperarc. Make sure that the hiperarc is setup properly by doing a list snmp communities. Make sure your NMS is in the access list with RO permissions. Todd -----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of Lewis Bergman Sent: Tuesday, July 23, 2002 12:26 PM To: usr-tc@mailman.xmission.com Subject: Re: [USR-TC] SNMP enable? On Tuesday 23 July 2002 09:58 am, Todd Bertolozzi wrote:
Okay....tell me exactly what you want...don't be greedy, I have other things to do. Also...which card are you trying to get this info from? I want to be able to get Modem utilization. I have the OID's that vast multitudes seem to be able to use which I got from the tc web page so many have referred to on this list.
I am trying with the NMC's IP. When I tried the HARC's IP number it didn't respond to snmpget. Maybe I have the HARC set up wrong for this? I Haven't been able to find any docs on this type of thing at CommWorks but would gladly accept a RTFM with a link. I am totally lost here for anyone who hasn't already noticed. If you have time to help i appreciate it. If not, I entirely understand. -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 115 _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc