Also sprach Donald Baud
My questions are: - How can I find out if the telco switch (DMS100) sends a Service ACK or not ?
If you're using NI-2 translation (which is not a switch type per-se), then you don't have service messages (not sure who the bright boy was that came up with an ISDN standard that doesn't have the ability to busy out the lines...oi), if you're on a custom DMS-100, then you should be OK.
- What kind of problem will I get if I disable the PRI messaging support (as stated in the release notes)
You won't be able to do any of the functions that require services messages...such as, busy out the lines with a localoutofservice command on the ds0's.
- How can I disable the PRI messaging support remotely through a HARC telnet connection
You can't directly...though you can use the Arc to set up a "virtual console" port to each DSP and disable them through the DSP "console" connection. Check the Arc user manual for info on how to set up DSP virtual consoles. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.