Look at "Speed" - you have 100Mbit/s full-duplex = 200Mbit/s total. ;) Good luck ! ====================== Andrey Zimin | AVZ7-RIPE MTU-Intel ISP Moscow, Russia ====================== ----- Original Message ----- From: "Brian" <signal@shreve.net> To: <usr-tc@lists.xmission.com> Sent: 23 ???????? 2000 ?. 09:44 Subject: Re: (usr-tc) "show duplex"?
I don't see duplex:
HiPer>> sh int eth:1 s
INTERFACE eth:1 SETTINGS Description: Ethernet Driver Type: ETHERNET-CSMACD Speed: 209715200 High Speed: 0 Administrative Status: Up Operational Status: Up Link Up/Down Traps: ENABLED Promiscuous Mode: FALSE Connector Present: TRUE Filter Access: OFF Last Change: 6d 17:01:50 Input Filter: Output Filter: Physical Address: 00:c0:49:0d:5f:c7
On Sat, 23 Sep 2000, Andrey Zimin wrote:
Does anyone know of a way from the CLI on an ARC to show the duplex setting of an ethernet interface? A way to force it? First's easy - "sh int eth:1 s" second - noway... :((
Good luck ! ====================== Andrey Zimin | AVZ7-RIPE MTU-Intel ISP Moscow, Russia ======================
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
----------------------------------------------- Brian Feeny, CCNA, CCDA signal@shreve.net Network Administrator ShreveNet Inc. (ASN 11881)
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.