Ok...Thanks... Reason I ask is since going to the .51 code we have had an excessive amount of users that say they either can't connect or they connect and 7sec (Reported by about 10 users) after they are disconnected. Also the HCF modems seem to be having a harder time connecting. Odd thing is this only happens after 5:30 to 6:00 pm when modem utilization starts to go up. Yet I can't seem to pin it down on any particular card that it is happening on. Any suggestions would be appreciated. Greg Owens Magnolia Internet Services http://www.magnolia-net.com ----- Original Message ----- From: Blake Fithen <fithen@NetworksPlus.com> To: <usr-tc@lists.xmission.com> Sent: Friday, April 21, 2000 11:22 PM Subject: RE: (usr-tc) software vs hardware
I run it on .49, .52, .53, .54, .55 without problems. I only check my modems once a week since I loaded 2.0.51.
Highly recommended.
Blake Fithen | Networks Plus Internet Services | support@networksplus.net
-----Original Message----- From: Greg Owens [SMTP:gowens@magnolia-net.com] Sent: Friday, April 21, 2000 11:10 PM To: usr-tc@lists.xmission.com Subject: (usr-tc) software vs hardware
Are there any issues running software version 2.0.51 with hardware version .53 or .49 ? Thanks Greg Owens Magnolia Internet Services http://www.magnolia-net.com
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.