13 Feb
2004
13 Feb
'04
10:20 a.m.
Check if "Auto Config on Card Initialization" is disabled in NMC's config group. Disable it if its enabled and than save all config to nvram. Wayne Hahn wrote:
Hello all,
I have a chassis that the HiperDSPs won't save the settings. If I make a change to the trunks or modems and save the config to NVRAM and reboot the card by doing a hardware reset or pulling the card all the settings go back to the default settings. Also how do I set the nmc chassis awarness to on ? Sorry for the simple questions.
Wayne Hahn
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc