I have followed the instructions below, but I am still having problems. The routes are not being propagated to the pop router. What are the sendpolicy commands used for? We've tried it with and without them with no change. This is our current layout. TC -> Cisco POP Router -> Cisco Core Router -> Internet Any information you need from our router guy to help further? -----Original Message----- From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Todd Bertolozzi Sent: Wednesday, September 15, 2004 11:19 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] Basic OSPF setup disable ospf delete ospf default_area set ospf default_area_id 0.0.1.7 (you will need to change this to the correct area) set ospf global asbr enable set ip network ip routing_protocols ospf add ospf sendpolicy x.x.x.0/25 source local action advertise add ospf sendpolicy x.x.x.0/25 source remote action advertise (the above IPs are for the ip pools) set ospf global traps disable enable ospf set ospf interface <ip of box> router_priority 0 save all Todd ----- Original Message ----- From: "Adam Barnhill" <adam@semo.net> To: "'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.'" <usr-tc@mailman.xmission.com> Sent: Wednesday, September 15, 2004 10:55 AM Subject: [USR-TC] Basic OSPF setup
Hi, Any of you guys have experience with setting up basic OSPF? I need to enable ospf on my ARCs and do a basic configuration. We need to know how to configure the Neighbor and AreaID variables.
I have looked at the knowledgebase and it doesn't seem clear.
If you should care to contact off-list: MSN: aleostax@hotmail.com
Thanks, Adam
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc