*This message was transferred with a trial version of CommuniGate(tm) Pro* If I'm not wrong (because of the sintax), you have to send an attribute called Framed-IP-Route. That attribute tells to the NAS to put a route of the subnet you need into its own routing table. I think you need to check radius attributes RFC. Regards.
Have an ISDN customer that wants 6 IPs in a subnet for his end. We are using TC hubs and we have assigned a static IP of xxx.xxx.88.193 with a Framed-IP- Netmask of 255.255.255.248 (/29) They make the connection and get the static IP assigned, but we can not Ping the IP.
I would like to know if there is some "Magic" we need to do on the TC HUBs to allow all of this to work. We have other clients that use the SINGLE static IP to manage clients behind there netowrk.
Any guidance appreciated
Phillip
------------------------------------------------- WebMail Services Provided By WorldNet Access ------------------------- This E-Mail Was Scanned For Viruses by RAV@WorldNet Access -------------------------
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010