I've been testing OSPF on a HiPerARC running version 5.1.99 firmware over the past several weeks. It's been working ok except for one possible problem. The routing table suggests the HiPerARC is actually picking up its default route from the NMC rather than through OSPF: Destination Prot NextHop Metric Interface 0.0.0.0/0 NetMgr 64.65.64.2 1 eth:1 4.24.134.16/30 OSPF 64.65.64.66 20 eth:1 10.1.2.144/29 OSPF 64.65.64.4 20 eth:1 63.0.0.0/A OSPF 64.65.64.2 20 eth:1 64.65.64.0/22 LOCAL 64.65.64.2 1 eth:1 ... Is there some configuration setting needed to tell the HiPerARC to use the default route learned from OSPF rather than the NMC? - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.