The V90 key is generated using the NMC serial number... so... each NMC will have an unique V90 key. Regards, Jorge Lozano <jorge@andinet.com> NA and ISSO Andinet On Line <http://www.andinet.com> The only way to predict the future is... to create it! -----Mensaje original----- De: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]En nombre de Brian Enviado el: Miercoles, 21 de Febrero de 2001 10:54 a.m. Para: USRobotics TC Mailing List Asunto: (usr-tc) v90 on the nmc If you have an NMC with v90 enabled, and you pull the flash out and move it to another NMC that is not v90 enabled, will that new nmc now be v90 enabled? In other words, is the key set in the flash and transportable between nmc's? or is it dependent on other factors? Brian ----------------------------------------------- I'm buying used CISCO gear!! email me for a quote Brian Feeny e:signal@shreve.net CCNP+Voice/ATM/Security p:318.222.2638x109 CCDP f:318.221.6612 Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.