Hello Aaron, Sunday, April 29, 2001, 7:12:02 PM, you wrote: Did you ever find a soulution to this problem if so what was it??? AD> Hi, AD> I am having problems with some Quad Analog modem cards that I have installed, AD> I cannot get them to stay active I do set modem s49 active and it all appears to work, then I save AD> and reset then I get whats below. AD> the modems report A/I/P then after a reset they go A/A/P but I cant get them A/R/P. AD> Basically the modem is not active because it cannot successfully negociate with the packet bus(I AD> think). AD> after a reset my syslog reports: AD> Apr 28 14:05:19 dialup9.dataheart.net S49 packet bus handle opened. Handle = 26. AD> After this the netserver reports the modem as active all though there is still no HDLC Framing and AD> the interface is still set to Unassigned instead of ptp49 as it usually is. AD> then 30 seconds later: AD> Apr 28 14:05:49 dialup9.dataheart.net S49 packet bus failed to connect! stat=-1 AD> Apr 28 14:05:49 dialup9.dataheart.net S49 packet bus handle closed. AD> now the netserver reports it as inactive again. AD> I have Quad Digital/Analog cards working fine in the same chassis but these Quad Analogs are just AD> not co-operating. AD> any help would be appreciated, AD> the 3com knowledgebase has not helped me. AD> Thanks, AD> Aaron Daniels AD> - AD> To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" AD> with "unsubscribe usr-tc" in the body of the message. AD> For information on digests or retrieving files and old messages send AD> "help" to the same address. Do not use quotes in your message. -- Thanks, Craig Craig@tavrida.net - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.