alex,
ICQ# 219089461,
Current status
Hi Kirti, To add the IP pool which users get assigned to when they dialup use the "add ip pool POOL_NAME priority 1 INITIAL_POOL_ADDRESS <first ip number> SIZE <number of ips>" command from the terminal interface ( have no idea how to do this in HARM, but if you look in the help for pool you should find it. The local IP address should be the IP address of your arc. Your arc (or both your arcs, if you are using more than 7 Hiper DSP cards) need to have their own IP address which is on the same subnet as your IP pool (it's a routing thing: using a private IP for the NMC is fine, but for the ARC, if you use a private IP, you have to use a private IP pool.) I think you can probably get around this with some routing at your gateway box, but for 1 or 2 IP's, I wouldn't bother. On Tue, 2003-09-16 at 18:44, Kirti S. Bajwa wrote:Hello List: I am almost done configuring a 3Com TC Chassis using Total Control Manager as configuring tool. However I am struck at couple of last configuration responses, as below: 1) HiPer ARC: What goes in "Local IP Address" field? Why is this IP addresses needed? Is this IP address same as the IP address in NMC? 2) Where and how an IP addresses assigned to Dial-in users. My understanding was that there is an entry in HiPer ARC, where a pool of IP addresses entered for dial-in assignment. I have no found any such entry. When a dial-in user connects to a HiPer DSP, an IP address is assigned. How and where that IP address is obtained from? Thanks. Kirt Bajwa TIB Computer Systems Mountain City, TN 37683 Tel: (423) 727-3001 eMail: kbajwa@tib.com _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc