Well, you're almost there.  Don't apply the outgoing filter.  Alternatively write an different outgoing filter that allows everything.  (Just restrict the packets that you're dialin user sends :-)

--
Vance McIndoe
InterConnect Ltd
Phone: +64-4-494-1144 Fax: +64-4-494-1140 Mobile: +64-27-2477-608
Street: Level 2, Exchange Place, 5-7 Willeston Street,
Wellington, New Zealand.
Postal: PO Box 5527, Lambton Quay, Wellington, NZ.
<mailto:vancem@interconnect.co.nz>
<http://www.interconnect.co.nz>

-----Original Message-----
From: Kancha . [mailto:kancha2np@yahoo.com]
Sent: Tuesday, 30 July 2002 11:25 PM
To: usr-tc@mailman.xmission.com
Subject: RE: [USR-TC] TC filter

Hello:

After executing the following commands i could not
browse or do anything. Couldnot even ping. Prior to
executing these commands though the filters were
applied i was able to do anything.

set interFACE slot:1/mod:[1-23] filter_accESS on
set interFACE slot:2/mod:[1-23] filter_ACCESS on
enable ip address_pool_filtering
save all
reboot

i'm running 5.1 of hyperArc

__________________________________________________
Do You Yahoo!?
Yahoo! Health - Feel better, live better
http://health.yahoo.com

_______________________________________________
USR-TC mailing list
USR-TC@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc