The passwords are your SNMP community strings. If you flip dipswitch 6 on, you will bypass the password screen. You can then disable the password prompt or change the strings. Steve David DenHollander <david@adoptable.com> on 11/18/99 12:48:12 PM Please respond to usr-tc@lists.xmission.com Sent by: David DenHollander <david@adoptable.com> To: usr-tc@lists.xmission.com cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) Resetting password on an NMC card I have a NMC card that is X2 enabled. The card also has a password, which I do not know. Is there away to reset the card without losing the X2 enabling? thanks David David DenHollander (403)254-1100 Main (403)201-2815 Fax - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.