set assigned <initial IP address of pool> set limit <size of pool> save all (and most importantly...) reboot -----Original Message----- From: Cheryl Johnson [mailto:netadmin@seidata.com] Sent: Thursday, November 18, 1999 5:11 PM To: usr-tc@lists.xmission.com Subject: (usr-tc) Netserver PRI I am setting up a Netserver PRI card and Quad (analog) modems. I set the modem pool up but it seems to be using ip's out of the ip pool. What is the command on the Netserver card to set the ip pool? I may not have used the correct command set. Â -C - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.