Hi, I am looking for a used Total Control Chasse with power supply no other cards if you know some one who has one let me know. Vince warlock@nci1.net At 03:17 PM 1/12/00 -0500, you wrote:
At 12:45 PM 1/12/00 -0700, Christopher Berry wrote:
We have had perennial problems with Hiper modems suddenly not responding. Every other day I get a random modem or two that stops responding per card. Rarely a software reset will return the modem to service. Usually, I wait a week until I have several, then do a hardware reset. This returns most to service, except the occasional bad channel.
You can soft-busy the modems through TCM to bypass them. Normally what I'll do is soft-busy the rest of the card when my nightime useage decreases. This won't knock anybody off but will prevent new connections, By morning, everyone's off the card and I can reset it without affecting anybody.
I am running 2.0.60 per 3com. I am not using 2.0.51 as I am under the impression it is for a newer hardware version than we own. I have not yet upgraded the Hiperarc software to the latest-I am waiting for the next time I do aforementioned hardware resets. (Day traders get very upset if they get booted : ). Suggestions and questions?
I had been seeing modem lockups at least weekly with 3 DSPs(0.49.0). I upgraded to ARC 4.2.32/DSP 2.0.81 about 3 months ago. Since then, I had my first modem lockup last night. Needless to say, this has been a great inprovement.
-- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Vincent - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.