*This message was transferred with a trial version of CommuniGate(tm) Pro* Hello I've been trying to change the defaultroute of 4 hiperARCs. I don't want to add another one with a different metric so I tried first delete the already set defaultroute and then add another one. This is more or less what I've (fake IPs because of the example): Internet Router 1: 192.168.1.1/255.255.255.240 Internet Router 2: 192.168.1.2/255.255.255.240 HARC 1 : 192.168.1.3/255.255.255.240 HARC 1 : 192.168.1.4/255.255.255.240 HARC 1 : 192.168.1.5/255.255.255.240 HARC 1 : 192.168.1.12/255.255.255.240 all HARCs have 192.168.1.2 as a default gateway. I'm running RIP V2 in all of them. They only publish the dial-up routes but they don't receive any default route via RIP. As you can see, all IP addresses of the four routers belong to the same network 192.168.1.0/255.255.255.240 When I try in any HARC to add de default route (after the 192.168.1.2 had been deleted) I receive the next message: ERROR - Specified gateway is not on a directly connected network. What am I doing wrong? Thanks in advance for the help. Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010