Hi Timothy, After experimentation on several diferent RAS'es, I finally determined that it just doesn't work this way as far as a secondary radius server goes. I wanted the same thing - have it try the first one then if it can't authenticate there, go try the second. But as I figured out, the secondary is there only if the first server fails to respond at all. If it gets any kind of response from the first (success/failure) it will never try the secondary. Lisa Casey, Webmaster Netlink 2000, Inc. lisa@jellico.net ----- Original Message ----- From: "Timothy C. Bohen" <Tim@CMSInter.Net> To: <usr-tc@mailman.xmission.com> Sent: Friday, February 22, 2002 11:57 AM Subject: [USR-TC] Secondary RADIUS authentication server.
Since everybody gave good compliments to VOP RADIUS, I am playing with the demo.
Since I cant just unplug my current RADIUS server yet, is there anyway to have the Arc try the primary server then check the secondary server.
Basically I created a unique user on the secondary server (one that is not on the primary server) so that I can experiment. But from what I can tell the Arc never even tries the secondary server it just has me retry my password, and I see the failed logins on the primary servers logs, but I never see anything on the secondary servers logs.
Any ideas?
Thanks
Timothy C. Bohen CMSInter.Net LLC / Crystal MicroSystems LLC =========================================== web : www.cmsinter.net email : Tim@CMSInter.Net phone : 989.235.5100 x222 fax : 989.235.5151
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc