Hi, we have a Hiper box that we have been adding some DSP cards to. My problem is extending the IP pool to cover the extra ports. Currently there are 4 DSP's with 2 more to be added today. They are using PRI's, but I want to put 24 IP's per DSP into the ARC. I currently have 1 pool defined as: Name Address Size InUse State Route Status pool1 xxx.xxx.xx.112/C 96 24 PUBLIC NO_AGGREGATE ACTIVE I want to change it to start at .64 and have 144 addresses. I think the best way would be to define 3 pools: .64/26 size 64 .128/26 size 64 .192/28 size 64 I even tried to just change the start address and pool size and the thing complains.
set ip pool pool1 iniTIAL_POOL_ADDRESS xxx.xxx.xx.64/C size 144 CLI - Request SET IP POOL failed on field INITIAL_POOL_ADDRESS CLI - Request failed with error: BAD_VALUE on value: 0.0.0.8
Any suggestions? Michael ---------------------------------------------------------------------- Michael J. Hartwick, VE3SLQ hartwick@hartwick.com Hartwick Communications Consulting (519) 396-7719 Kincardine, ON, CA http://www.hartwick.com ---------------------------------------------------------------------- - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.