I have a new DSP card that first of all wouldn't allow me to flash new code to it through TCM, it kept giving a "TFTP error: Access violation" error. So I hooked up to the console port and was able to upload the 2.0.51 code to it. After I reset the card it came up fine and reported the correct software version, but after a couple of hours TCM reports the card failed. I can do a hardware reset and it will be fine for a few more hours, but it will eventually report failed. What can I do to resolve this? Thanks. -- Mike Wilker Director of Network Operations Local Link, Inc. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.