Is it possible to get a Netserver to connect to a HiPer ARC with more than one channel (by using multilink)? We're trying to move a customer over from dialing into another Netserver (not ours) into an ARC running 4.1.59. The login is set in RADIUS, and does work for a single channel. We have no Port-Limits set, and the ARC has the default 2 Max-Chan. We can get the first channel up, but the second channel connects then drops. Here is the "mon ppp" output: Incoming PPP Data on interface: slot:10/mod:23 LCP CFG_ACK MRU 05 ea ASYNC_MAP ff ff ff ff MAGIC_NUM 4c 56 1b da PROTO_COMP AC_COMP MPP_MRRU 05 ea MPP_ENDPTID 00 Incoming PPP Data on interface: slot:10/mod:23 LCP CFG_REQ MPP_ENDPTID 04 6f f7 09 08 ASYNC_MAP ff ff ff ff MAGIC_NUM 23 ea 32 19 Outgoing PPP Data on interface: slot:10/mod:23 LCP CFG_ACK MPP_ENDPTID 04 6f f7 09 08 ASYNC_MAP ff ff ff ff MAGIC_NUM 23 ea 32 19 --- [The call is then dropped] ---
From what I can see, there are no NAK's which should cause a protocol termination. In the RADIUS accounting logs, the session has a Term-Cause of NAS-Error.
Any advice? Thanks, Carl - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.