Did you check the second ARC to ensure it was not set to own the cards? Was chassis awareness enabled when it booted? As well, when we swapped from NMCs to HiperNMCs the chassis went bezerk and was doing all sorts of weird stuff until we rebooted it (minutes later). All better! Good luck with the problem and let us know if you need anything further. Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com ----- Original Message ----- From: "Jonathan Byrne" <byrnej@gol.com> To: <usr-tc@lists.xmission.com> Sent: Wednesday, October 11, 2000 1:43 AM Subject: Re: (usr-tc) Error codes on HDSP lamps?
Marshall Morgan (marshall@netdoor.com) wrote:
If the D channel is not working it will be red - ensure you have the right settings for the switch type (5ESS, DMS, whatever). ... if it is orange I think it's in loop back.
Thanks, Marshall, that did the trick. It had lost its mind on the switch type setting, and changing it back to ins1500 and a hardware reset did the trick.
That gets me down to one other odd thing on this chassis. All (seven) HiperDSPs are now happily taking calls, but the hub status light on the NMC is cycling between green and red at roughly 15 second intervals, but no other alarm lights are on - everything is green.
I recently put a second HiperARC into this chassis and replaced the NMC with a HiperNMC, but this condition existed before that, so it would appear to be something in the first HiperARC or one of the seven DSPs (all owned by the first HiperARC; the second one is just there as a backup).
Has anybody seen anything like this?
Thanks,
Jonathan Byrne Engineering Division Exodus Communications K.K. http://www.exodus.co.jp/ Tel: +81 3-5334-1700 Fax: +81 3-5334-1702 Direct: +81 3-5334-1756
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.