I apologize for my ignorance but what do I need to do to ensure that it is Analog-Digital? Is that the Nic or the Nac? At 09:32 AM 12/9/2003, you wrote:
You can do this if your card is Analog or Analog-Digital.
Dev wrote:
Hello all,
I have seen several post about setting a Digital/Analog Quad Card up to allow POTS lines but none have addressed my issue.
My Issue is that in the TCM I have an option to set the line interface source to: (1) = nic (2) = t1Tdm (3) = priTdm
The problem is that the NIC setting will not set! I can go back and fourth between t1 Tdm and pri Tdm.
What am I missing?
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc