I've been trying for the past several hours to get the modem disconnect reasons logged from the Hiper DSPs. I've configured the trap destination through TCM, enabled logging groups 2345 on the NMC and set the logging server to a radius server (Cistron/FreeRadius 1.6.0 on Linux) running on port 1813 on a spare machine. Then I configured the DSPs to log groups 1-4 and enabled the traps for incoming termination. Then I save the template to NVRAM and refresh it. Everything works great up to that point, I can see the modem disconnection reasons in the radius detail log. The problem is that as soon as I refresh the template, no incoming calls can be established on the DSP. "monitor ppp" shows absolutely nothing and a packet dump shows that no radius packets are being exchanged with the authentication server. So I get to watch as clients already on the server disconnect, but no new connections will be successful. As soon as I "restore modem from default" in TCM, calls can be authenticated again but the disconnection reasons logging ceases to work. It seems I can get the reasons logged or get people authenticated, but not both simultaneously. I've probably overlooked something in the configuration that is causing this problem, but I can't find anything in the documentation library (including the documentation CD) or in the KB. Has anyone else gotten modem disconnection reasons logged? Here's the relevant info on this particular chassis: The DSPs are hardware version 0.53.0 running DSP code 2.0.51 The ARC is hardware version 19.0.0 running 4.2.32 The NMC is hardware version 2.0 running 6.2.17 Let me know if you need more information. Thanks in advance, -- Brian Buffington BridgerNET Systems Administrator draconis@bridgernet.com (435)753-2030 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.