the NMC only allows you to remote configure want you want and to update software to each card.  The device will run without a NMC and you could simply just move an NMC to the machine you wanted to use,
----- Original Message -----
From: Shahrooz Sharghi
To: Discussion relating to the 3Com/US Robotics Total Control modemsystems.
Sent: Thursday, July 07, 2005 12:06 PM
Subject: Re: [USR-TC] NMC

I think there is no problem using Chassis without NMC at least analog/digital quad cards, Am I right?
 
----- Original Message -----
From: Ross Cornett
To: Discussion relating to the 3Com/US Robotics Total Control modemsystems.
Sent: Thursday, July 07, 2005 9:54 AM
Subject: Re: [USR-TC] NMC

I have never tried to put that NMC in a nother slot, but in your case it is worth the try.
 
I would also try another back side card.
 
After this the chassis must be replaced.
 
They are cheap.
 
 
----- Original Message -----
From: Shahrooz Sharghi
To: Discussion relating to the 3Com/US Robotics Total Control modemsystems.
Sent: Thursday, July 07, 2005 11:44 AM
Subject: Re: [USR-TC] NMC

in another chassis it works normal!
what do I have to do with my chassis then?
 
----- Original Message -----
From: Ross Cornett
To: Discussion relating to the 3Com/US Robotics Total Control modemsystems.
Sent: Thursday, July 07, 2005 9:31 AM
Subject: Re: [USR-TC] NMC

email me off line.  I will assist you if I can.
 
Sounds like it could be a lights out for the card.  Do you have others to see what they will do?
 
Other chassis's available to see if the chassis port is bad where the NMC card plugs in?
 
Ross
 
----- Original Message -----
Sent: Thursday, July 07, 2005 11:21 AM
Subject: Re: [USR-TC] NMC

yes, I have read and write access to it, the keys are factory default "public" & "private"
also my station running TCM works with other NMC and TCMs.
 
Thanks a lot
 
----- Original Message -----
Sent: Thursday, July 07, 2005 9:03 AM
Subject: Re: [USR-TC] NMC

are you sure you have read and write capability to the chassis?
 
SNMP could be the issue here.
 
Just checking.
 
----- Original Message -----
Sent: Thursday, July 07, 2005 10:27 AM
Subject: [USR-TC] NMC

I have to add that my NMC even doesn't detect netserver card (it detects nothing!). Is it a bad card? how can I repair it?
Thanks
Shahrooz

_______________________________________________
USR-TC mailing list
USR-TC@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

_______________________________________________
USR-TC mailing list
USR-TC@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

_______________________________________________
USR-TC mailing list
USR-TC@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

_______________________________________________
USR-TC mailing list
USR-TC@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

_______________________________________________
USR-TC mailing list
USR-TC@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

_______________________________________________
USR-TC mailing list
USR-TC@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

_______________________________________________
USR-TC mailing list
USR-TC@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc