Here's a few commands to get you going Steve......
show session ........status of modem ports show all .......is modem ready to take a call show global .......config of cards
you could try a "set modem" to get all your cards up as well, if all your modem cards are configured for dial-in:
set modem all inactive set modem all active
Thanks, Steve Wujek Solunet TAC -----Original Message----- From: Steve McConnell [mailto:stevem@emji.net] Sent: Monday, April 08, 2002 2:29 PM To: usr-tc@lists.xmission.com Subject: [USR-TC] old netserver question OK, so I am way out of practice here on netservers, can anyone still on the list give me a hand? I have a Netserver PRI chassis with 2 PRIs coming into it. the telco is saying that he has traffic on both spans, but I am only getting calls on the first 6 quad modem cards. I know that I am just missing something real obvious config statement, but does anyone remember/use the command to make sure all modem cards/channels are in use? the netserver is running V3.8.1 code. Steve McConnell EMJ Internet 919.545.2545 http://www.emji.net _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc