If you're using TCM, Configure->Programmed Settings->Data Compression Settings. Change it from "autoenable" to "none". BUT... look at the disconnect reasons here first. If v.42bis was causing your problem, you'd see disconnect reasons of "v.42 invalid codeword" and "v.42 string too long" and "link security abort". If you're seeing this, you've got a problem that turning v.42bis off will solve. If you're not seeing this, you've got something completely different. (Look at http://www.dcr.net/~mandrews/usrtoys/discreasons.txt for a full list) 3Com tells us that the v.42bis problem is hardware related (that's why it only affects the first 12 or last 12 channels)... however I haven't seen a good explanation as to why it affects only v.42bis and nothing else the card does, why lots of people have this exact same problem in the exact same way (hardware normally fails a little more randomly than that), or if it's related only to specific harware revisions of the card... I've got one DSP card out of 17 that has this problem. Mike Andrews (MA12) * mandrews@dcr.net * http://www.bit0.com/ VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet services for Frankfort, Lawrenceburg, Owenton, Shelbyville "Don't sweat the petty things, and don't pet the sweaty things." On Fri, 18 Feb 2000, David Swearingin wrote:
At 12:39 AM 2/18/2000 -0500, you wrote:
If they're all from the first 12 channels only, or the second 12 channels only, turn off v.42bis hardware compression.
Mike Andrews (MA12) * mandrews@dcr.net * http://www.bit0.com/
Mike, where do you turn off v.42bis?
David __________________________________________________ David Swearingin (david@carolnet.com) CARROLLTON INTERNET SERVICE (www.carolnet.com) First Financial Group, Inc. 11 N. Folger, Carrollton, MO 64633 660-542-3002 Fax 660-542-3003
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.