I have two HiperDSP card sets which TCM doesn't recognize. After a reboot, one Utilization LED lights up - the 4th LED from the bottom is amber. Also the Run/Fail LED is red. These cards were operating fine as hot spares in a different chassis, but after moving to another chassis, they wouldn't boot. Moving the cards back to the original chassis results in the same problem. I have tried reloading the software via the AUX port which was successful, except the same problem is happening after the software reload. Any ideas? ---------------------------------- Kevin Hemsley Systems Engineer Microserv Computer Technologies, Inc. kev@ida.net KB7TYA - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.