Patrick, #1 - Create a "modem pool" for dialout add modem_group "name" interface [slot:x/mod[a-b] list modem_groups >>>> This will verify that it was created properly #2 Create your network service for dialout. In your case, this is the one that is actually used on your HiperARC! add network serVICE dialout serVER_TYPE telnetd sock 6666 data "service_type=dialout,modem_group=\"dialout\",auth=off, login_banner=\"You are connnected to a high speed modem Type ate1c0v1 and press ENTER\"" **** Take note of the comma after "auth=off" .. You NEED it there, also, when you paste this into your HiperARC, take out the Return / Linefeed and any additional white spaces. list network services >>>>> Verify that the service has been created #3 Telnet to the port specificed in your service. Thanks, Brian Smith CCNA, NCSA Network Support Engineer SOLUSERVE www.solunet.com 1571 Robert J. Conlan Blvd., Suite 110 Palm Bay, FL 32905 (888)449-5766 fax: (321)-676-1287 -----Original Message----- From: Patrick Ndegwa [mailto:pndegwa@ke.uu.net] Sent: Wednesday, August 07, 2002 6:24 AM To: usr-tc@mailman.xmission.com Subject: [USR-TC] Configuring dial-out on TC Hi there. I am looking to setup dial-out from a Hiper DSP (through a Hiper ARC ver. 5.3.105) . I would appreciate any assistance on this (even RTMF resources). Cheers, Patrick Ndegwa _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc