I haven't had any luck trying to add a second network. It keeps telling me that the new ip address is being used by the other network. When I do a: "sho ip network workgroup" I get: SHOW IP NETWORK workgroup SETTINGS: Interface: eth:1 Network Address: 199.108.167.9/C Frame Type: ETHERNET_II Status: ENABLED Reconfigure Needed: FALSE Mask: 255.255.255.0 Station: 199.108.167.9 Broadcast Algorithm: IETF Max Reassembly Size: 8192 WAN Type: N/A Remote IP Address: 0.0.0.0 IP Routing Protocols: OSPF IP Routing Metric: 1 RIP Interface Export Metric: 0 IP RIP Routing Policies: IP RIP Authentication Key: Is the "/C" on the network address preventing me from adding another? Thanks for your help. Tom Swenson NetConX - Internet Access - Web Design - Client Managed Web Database Applications tom@netconx.net http://www.netconx.net (515) 421-4170 - Voice (515) 423-3351 - FAX Everything looks impossible for the people who never try anything. -- Jean-Louis Etienne *********** REPLY SEPARATOR *********** On 11/20/2000 at 10:12 AM Jorge Lozano wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi Tom: I have a chassis with 2 sp, 2harcs, 14 dsps and 1 hnmc working well. If you have alarms, maybe you will want to contact your telco provider. If you want to configure the second ethernet port in your Hiper ARC, you must set the ip addres, netmask, as you do it with the first port, with a command as the following:
add ip netWORK net2 addRESS 208.22.2.2 frAME ethERNET_II enaBLED yes intERFACE eth:2
Regards,
Jorge Lozano <jorge@andinet.com> NA and ISSO Andinet On Line <http://www.andinet.com> The only way to predict the future is... to create it!
- -----Mensaje original----- De: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]En nombre de Tom Swenson Enviado el: Domingo, 19 de Noviembre de 2000 02:04 p.m. Para: usr-tc@xmission.com Asunto: (usr-tc) Questions about 2nd ethernet port and tcm
I have never set up my second ethernet ports on my hiperarcs, and was wondering if I should. I have a full blown chassis with 2 ps's, 2 hiperarcs, and 14 dsps. If I should, can anyone tell me what or where to look for details on how to make this work? I got a feeling I'm sending too much traffic thru 2 hiper's and two ethernet ports.
Also, today I hit the reverse button in the TCM and I noticed that 6 of my 14 dsp's have big red '?''s on them. Don't know what this would mean on the back side.
Tom Swenson NetConX - Internet Access - Web Design - Client Managed Web Database Applications tom@netconx.net http://www.netconx.net (515) 421-4170 - Voice (515) 423-3351 - FAX
Everything looks impossible for the people who never try anything. -- Jean-Louis Etienne
- - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
-----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.8 for non-commercial use <http://www.pgp.com>
iQA/AwUBOhk/Xap3oywyFVUlEQJIswCeLsdudNCinJh/xSt/+UJ70AoQVnYAoNQf HfX1fDCVXJ3g+lTkl4esd4RS =rpnc -----END PGP SIGNATURE-----
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.