At 11:04 PM 2/21/00 -0500, Steve Cobb wrote:
Thanks for the help guys but I still need some more. I'm running all HiperDSP cards and can run the command line "perl hiperdsp.pl public@xxx.xxx.xxx.xxx" and I get a list of two numbers, which is the number of users online and the total number of modems.. That's great but how do I incorporate this into MRTG? When I make a mrtg.cfg file and use the OID that is in the hiperdsp.pl file, 1.3.6.1.4.1.429.1.27.2.1.26, and then run mrtg, i get an SNMP error: no response received. How can I get this to work so that I can graph out modem usage?? I have included the mrtg.cfg file:
Here's mine, works fine; #..................................................................... Target[tch1]: 1.3.6.1.4.1.429.4.2.1.10.0&1.3.6.1.4.1.429.4.2.1.10.0:<COMMUNITY>@<ARC IP> MaxBytes[tch1]: 69 Unscaled[tch1]:ymwd Title[tch1]: Total Control Hub #1 PageTop[tch1]: <H1>Keystone Connect Modem Utilization </H1> <TABLE> <TR><TD>System:</TD><TD>3Com Enterprise Network Hub </TD></TR> <TR><TD>Maintainer:</TD><TD>Keystone Connect</TD></TR> <TR><TD>Interface:</TD><TD>HiPer DSP (2)</TD></TR> <TR><TD>Configuration:</TD><TD>ISDN, USR x2 and v.90 56k protocols</TD></TR> <TR><TD>Capacity as configured:</TD> <TD><b>69 modems (23 per DSP)</b></TD></TR> </TABLE> YLegend[tch1]:Modem Useage Options[tch1]:gauge Xsize[tch1]: 600 Ysize[tch1]: 200 ShortLegend[tch1]:Modems Legend1[tch1]:Modem Utilization Legend2[tch1]:Modem Utilization LegendI[tch1]: Utilization LegendO[tch1]: Utilization #--------------------------------------------------------------- -- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000/886-2500 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.