- USR-TC - mailman.xmission.com

Re: (usr-tc) HyperARC/DSP Problem
by K Mitchell 13 Jan '00

13 Jan '00

At 11:26 AM 1/13/00 -0500, Paul Farber wrote: >Call in to the rack and see if you get 'dead air'. IE pick up with no >negotiation. This isn't always conclusive. You may have a customer getting "dead air" and, since that channel's in use, you'll get rolled over to a working modem. >Or if you get a busy but still have open modems. I don't think there is a >way in TCM to check it. I'm not aware of any way to through TCM either. -- Kirk Mitchell-General Manager mitch(a)keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Netserver PRI Max connections
by Phil Le Clercq 13 Jan '00

13 Jan '00

Yep it's set to 60. "Assigned Pool Size: 60" Phil -----Original Message----- From: Charles Sprickman [mailto:spork@inch.com] Sent: Thursday, January 13, 2000 4:03 PM To: 'usr-tc(a)lists.xmission.com' Subject: RE: (usr-tc) Netserver PRI Max connections It's a dumb question, but you do have a big enough IP pool, right? :) Charles - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Netserver PRI Max connections
by Phil Le Clercq 13 Jan '00

13 Jan '00

Hi all, I have a chassis with dual pri, 56 digital modems ( 14 quads) and one Netserver (3.8.1). My problem is the chassis never takes more than 30 calls. Both PRI's (European) are working ok, I got the telco to busy out the other feeds so all calls went to this chassis. You can see the modem's taking the call but above 30 connections the user gets "disconnected from the remote machine" as an error. I believe the problem lies with the Netserver. I guess I'm just missing a command to set max connections to 56 but I cant remember or find it! I presumed that Netservers were set to 60 connections by default, this is something I've not had to do before as all our others chassis' have 30 ports only. Thanks in advance for any help :-) Cheers, Phil - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) DSP cards rebooting
by Cheryl Johnson 13 Jan '00

13 Jan '00

Anyone else have this problem using the 2.0.60 version on the HiPerDSP cards? This code is supposed to help with the modem pair problem. Although this problem has not been as noticeable as the past, I still have various modem problems and recently noticed DSP cards rebooting. I just recently upgraded the TC chassis to the code above and seem to having problems with it. I have also been experimenting with increasing the Carrier Loss Detect Delay on the DSP cards, anyone had any luck with increasing this setting? I am not sure if this may be causing problems or not. Cheryl Johnson netadmin(a)seidata.com SEI Data Network Services, Inc.

3 4

Re: (usr-tc) HiperARC 4.1.22 and 5.10.9 Quads
by Greg Coffey 12 Jan '00

12 Jan '00

We've been running it for weeks with no apparent problems. I don't know if its any better but it's certainly not any worse. At 05:02 PM 1/12/00 -0600, you wrote: >Will HiperArc version 4.1.22 work with: > >NMC 5.5.5 >Quad Modem version 5.10.9 >Dual Channelized T1 (386) 4.2.1 > >I'm scared to upgrade to 6.1.6 on the Single-Sided Quads. 5.10.9 is very >stable for us. Anyone running 6.1.6 fine??? > >- > andrew > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. Thanks, Greg Coffey <gcoffey(a)vcn.com> Visionary Communications V 307-234-5443 F 307-234-5446 100 N. Center #100, Casper, WY 82601 www.vcn.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) Disconnect reasons
by Steve Valiunas 12 Jan '00

12 Jan '00

Greg, See the Hiper Network Management Card SNMP and MIB Reference (# 1.024.1661-00), available on http://totalservice.3com.com. Chapter 24: Modem Disconnect and Fail to Connect Reason Reference is what you'll be interested in. STeve Valiunas "Greg owens" <gowens(a)magnolia-net.com> on 01/11/2000 07:35:08 PM Please respond to usr-tc(a)lists.xmission.com Sent by: "Greg owens" <gowens(a)magnolia-net.com> To: usr-tc(a)lists.xmission.com cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) Disconnect reasons Looking at the Total Control It will list several types of disconnect reasons.....rcvdGatewayDiscCmd, NormalUserCallClear,v42DisconnectCm, along with several others...Where can I find a explanation of these reasons. Which ones other than CarrierLoss should alert me to problems other than the users just logged off. Thanks Greg Owens Magnolia Internet Services http://www.magnolia-net.com

3 2

(usr-tc) RADIUS check items?
by Jesse Sipprell 12 Jan '00

12 Jan '00

Can anyone tell me what RADIUS check attributes are sent (by the HARC) in the initial auth request packet in order to determine an Async or ISDN call? Thanks! -- Jesse Sipprell Technical Operations Director Evolution Communications, Inc. 800.496.4736 * Finger jss(a)evcom.net for my PGP Public Key * - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) IPX Config Help
by Chris Hanes 12 Jan '00

12 Jan '00

I'm having trouble getting IPX to work on my boxes. Each box is receiving ipx routes and sap info from my Cisco, but that info is not being propagated to dialin sessions. Currently routing is set to listen only; does this need to be set to broadcast in order for the routes to be sent to the modem connections? Also, radius is sending Framed-Routing = Listen and Framed-IPX-Network = 255.255.255.254. What am I missing here? Thanks. Chris Hanes Network Admin Internet Connections - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) Disconnect reasons
by Greg owens 12 Jan '00

12 Jan '00

Thanks....Much obliged :-) ----- Original Message ----- From: Steve Valiunas To: usr-tc(a)lists.xmission.com Sent: Wednesday, January 12, 2000 10:07 AM Subject: Re: (usr-tc) Disconnect reasons Greg, See the Hiper Network Management Card SNMP and MIB Reference (# 1.024.1661-00), available on http://totalservice.3com.com. Chapter 24: Modem Disconnect and Fail to Connect Reason Reference is what you'll be interested in. STeve Valiunas "Greg owens" <gowens(a)magnolia-net.com> on 01/11/2000 07:35:08 PM Please respond to usr-tc(a)lists.xmission.com Sent by: "Greg owens" <gowens(a)magnolia-net.com> To: usr-tc(a)lists.xmission.com cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) Disconnect reasons Looking at the Total Control It will list several types of disconnect reasons.....rcvdGatewayDiscCmd, NormalUserCallClear,v42DisconnectCm, along with several others...Where can I find a explanation of these reasons. Which ones other than CarrierLoss should alert me to problems other than the users just logged off. Thanks Greg Owens Magnolia Internet Services http://www.magnolia-net.com

1 0

RE: (usr-tc) IAS accounting problem with HiperArc
by USRobotics TC Mailing List 12 Jan '00

12 Jan '00

The problem went away when I upgraded the Harc to 4.1.22. Thanks for your help. Anu Jolliffe Network Administrator Imagen Communications Inc. (250) 538-0406 FAX (250) 537-5820 -----Original Message----- From: Steve Valiunas [mailto:Steve_Valiunas@mw.3com.com] Sent: Monday, January 10, 2000 3:46 PM To: usr-tc(a)lists.xmission.com Subject: RE: (usr-tc) IAS accounting problem with HiperArc Anu, That would have been primary-accounting-server-2, not secondary-server as I wrote, but I'm sure you checked that as well. What version of Harc code? If you want to capture a bit of MonitorRadius in hex mode (while sending Malformed packets of course), and send it to me along with the accounting sercret used, I can see see if anything looks whacky. Steve Valiunas steve_valiunas(a)3com.com USRobotics TC Mailing List <USRoboticsTCMailingList(a)imagenisp.com> on 01/10/2000 05:17:26 PM Please respond to usr-tc(a)lists.xmission.com Sent by: USRobotics TC Mailing List <USRoboticsTCMailingList(a)imagenisp.com> To: "'usr-tc @lists.xmission.com'" <usr-tc(a)lists.xmission.com> cc: (Steve Valiunas/MW/US/3Com) Subject: RE: (usr-tc) IAS accounting problem with HiperArc That's the first thing I did when I ran into the problem. I even verified the secrets on the HipeArc using the _show accounting radius secret. Anyone have any other suggestions? Anu Jolliffe Network Administrator Imagen Communications Inc. (250) 538-0406 FAX (250) 537-5820 -----Original Message----- From: Steve Valiunas [mailto:Steve_Valiunas@mw.3com.com] Sent: Monday, January 10, 2000 8:44 AM To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) IAS accounting problem with HiperArc Check your secondary-server's shared secret. STeve Valiunas USRobotics TC Mailing List <USRoboticsTCMailingList(a)imagenisp.com> on 01/09/2000 03:01:53 PM Please respond to usr-tc(a)lists.xmission.com Sent by: USRobotics TC Mailing List <USRoboticsTCMailingList(a)imagenisp.com> To: "USRobotics TC Mailing List cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) IAS accounting problem with HiperArc I am having a problem with my HiperArc and accounting using Microsoft IAS. I have my first accounting server specified as the primary accounting server, and everything is working fine as is. The problem I'm having is related to my second server, which I intend to use as a backup in case the first one goes down. When my second server is set as the secondary server, everything works okay. However, when I have my second server set as the primary first backup, no accounting records are recorded and the NT event log is full of malformed packets. What is different about the packets when they are sent to the server configured as the primary first backup versus the secondary? My other chassis which runs a NSC has no problem at all with the second server. Thanks for your help. Anu Jolliffe Network Administrator Imagen Communications Inc. (250) 538-0406 FAX (250) 537-5820 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1