- USR-TC - mailman.xmission.com

(usr-tc) DSL
by Declan Campbell 17 Feb '00

17 Feb '00

The 3Com TCH DSL card (dual port, frame over adsl signalling), was discontinued as a product for sale as it was deemed 'end of life' by 3Com management, early last year (1999). What happened to the total control dsl card? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) TC call Barring or something
by bert.f＠pacific.net.ph 17 Feb '00

17 Feb '00

Hi! I just want to know if the TC is capable of blocking a certain telephone number? Thanks. Bert - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

10 10

(usr-tc) Need some help.
by Sergio Gonzalez 17 Feb '00

17 Feb '00

*This message was transferred with a trial version of CommuniGate(tm) Pro* Hello there. I got a little problem. I'm hopping you can help me. A few days ago I installed a new Hiper DSP where other 3 DSPs were working in conjuction with a Dual E1/PRI card and some quad modems cards. Well, after insert the new DSP in the chassis and move the Dual E1 one slot to the right, the 4 DSP are working well, but the Dual E1 seased functions!!! .. There was no reconfiguration over the Dual E1, and it was working as well as it cans before the instalation of the new DSP. These were the cards positions before the instalation of the new DSP (all worked well) slot 1 -> Hiper DSP (30 Chan) slot 2 -> Hiper DSP (30 Chan) slot 3 -> Hiper DSP (30 Chan) slot 4 -> Dual E1/PRI slot[5-9] -> Empty slot10 -> Quad Modem Digital slot11 -> Quad Modem Digital slot12 -> Quad Modem Digital slot13 -> Quad Modem Digital slot14 -> Quad Modem Digital slot15 -> Quad Modem Digital slot16 -> Hiper ARC slot17 -> NMC and these are the positions AFTER the installation (only DSP work!!) slot 1 -> Hiper DSP (30 Chan) slot 2 -> Hiper DSP (30 Chan) slot 3 -> Hiper DSP (30 Chan) slot 4 -> Dual E1/PRI slot 5 -> Hiper DSP (30 Chan) slot[6-9] -> Empty slot10 -> Quad Modem Digital slot11 -> Quad Modem Digital slot12 -> Quad Modem Digital slot13 -> Quad Modem Digital slot14 -> Quad Modem Digital slot15 -> Quad Modem Digital slot16 -> Hiper ARC slot17 -> NMC What should be happening? Thanks in advance for the help. /Sergio Sergio Gonzalez Director Operativo -- Operative Manager Skynet de Colombia S.A. SantafÃ© de BogotÃ¡, Colombia, South America. 57(+1) 6 422 020 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) DSPCode 2.0.51
by Mark Lemmert 17 Feb '00

17 Feb '00

At 05:30 PM 1/25/00 -0600, Brian wrote: >I have seen more connection success rate with 2.0.51. I use to get 94-98% >connection success overall for all calls to a chassis for a 24 hour >period. > >I now see more like 96-98% average. How do you get those sorts of statistics? I have been having a very large number of complains from people saying the can't connect. I am running 2.0.81. Thanks. -MGL >On Tue, 25 Jan 2000, Charles Sprickman wrote: > > > On Tue, 25 Jan 2000, Brian wrote: > > > > > 2.0.51 is good for all DSP's > > > > How's it compare to 2.0.81? Better, worse, indifferent? > > > > Charles > > > > > On Tue, 25 Jan 2000, Cheryl Johnson wrote: > > > > > > > Is this code only recommended for hardware revisions .54 and .55 only? > > > > I have .49 and was thinking of moving to the 2.0.51 from the 2.0.60 > > > > since I do not see too many improvements. And is this compatible with > > > > NMC 6.1.17 and ARC 4.1.22? It seems to be getting more difficult to > > > > keep these things straight. > > > > > > > > -Cheryl Johnson > > > > SEI Data Network Services, Inc. > > > > A Division of SEI Communications > > > > > > > > > > ----------------------------------------------------- > > > Brian Feeny (BF304) signal(a)shreve.net > > > 318-222-2638 x 109 http://www.shreve.net/~signal > > > Network Administrator ShreveNet Inc. (ASN 11881) > > > > > > > > > - > > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > > with "unsubscribe usr-tc" in the body of the message. > > > For information on digests or retrieving files and old messages send > > > "help" to the same address. Do not use quotes in your message. > > > > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > >----------------------------------------------------- >Brian Feeny (BF304) signal(a)shreve.net >318-222-2638 x 109 http://www.shreve.net/~signal >Network Administrator ShreveNet Inc. (ASN 11881) > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. Mark Lemmert CTO AthEnet Data Exchange 920-954-9799 mark.lemmert(a)athenet.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) FS: TC Box
by Jerry Wright 17 Feb '00

17 Feb '00

For Sale: Older Total Control Bundle... Total Control Chassis with 2 45 Amp powersupplies 1 NMC NIC and NAC 1 Netserver NIC and NAC 12 Quad analog/Digital Modems T1/E1 NAC with T1 NIC Fan-tray Cables and software Help with setup if needed... (passwords included...) Not V.90 enabled. $3100.00 Jerry Wright (509) 762-5381 (Primex Aerospace) (509)762-5258 (Home) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 6

(usr-tc) Help with Soft busy
by Scot Desort 17 Feb '00

17 Feb '00

I just soft-busied one of my DSP's, and now dialing into the hunt group, I get a reorder. How do I undo this? -Thanks Scot - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) mrtg tc help needed
by Greg Long 17 Feb '00

17 Feb '00

Hello! Look in your \mrtg\contrib directory. There should be a "tch" folder. If not grab the latest version of MRTG. There are some pl files, an mrtg.cfg file and a readme file in there that can help you get it working. Thanks, Greg Long Network Administrator Coastlink 801-532-6212 ext 32 greg(a)no-spam.coastlink.com (remove no-spam. to email me) http://www.coastlink.com -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jolliffe, Anu Sent: Friday, January 07, 2000 2:27 AM To: 'usr-tc(a)lists.xmission.com' Subject: (usr-tc) mrtg tc help needed I already have mrtg working on our routers, but I am in desperate need of help getting mrtg to graph our total control modem usage I would like to setup mrtg to create pages similar to the ones found at http://statistics.1st.net/3com/. I currently have three chassis, one running hiper dsp's and an arc, with the other two are running quad's and nsc's. So far I have searched the archives at http://usr-tc.1st.net/ and been to the following sites in order to figure this out. http://www.dcr.net/~mandrews/usrtoys/index.shtml and http://www.netdoor.com/arcwho/ I have also accumulated, hiperarc.pl, hiperarc_count.pl and hiperdsp.pl, but I am still at a complete loss and basically need step by step instructions. Any help appreciated, thanks. Anu Jolliffe Network Administrator Imagen Communications Inc. (250) 538-0406 FAX (250) 537-5820 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Help?
by stevec 17 Feb '00

17 Feb '00

We are a new ISP and all our equipment (routers, USR TC) were installed by our TELCO provider for warranty purposes. However, I would like to learn as much a possible about our equipment, specifically our TC chassis. I don't know what kind of cards we have, what revisions, etc. This is all information I would like to know. Where can I get familiar with the equipment I have? -- Steve Cobb stevec(a)computer-geeks.com Computer Geeks www.computer-geeks.com -- - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) CT1 problem
by Mark Thornton 17 Feb '00

17 Feb '00

I am having a problem on three incoming CT1's that are terminated by the T1 card to quad modems. We are seeing "bipolar violations", "code violation errors", and "bursty errored seconds". The telco has looked into the hdsl carrier and it shows no errors. Neither does the central switch. They put a tcomm tester on the T1 to watch the data and it reported "secondary channel loss", but they are unable to determine what that means in the context of a T1. I began looking for problems when the number of people complaining about not being able to stay online jumped significantly today. They report the problem has been going on for the past two days. Does anyone have any thoughts on what these errors point to? The telco is going to replace cards in the central switch this weekend, and I'm considering resetting the T1 cards to see of that is it. I appreciate any help you can give. Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 6

(usr-tc) mac's connect at slow speeds
by David Ernst 17 Feb '00

17 Feb '00

Does anyone else seem to have relatively consistent problems getting new Macintosh users to be able to connect at v.90 speeds? David Ernst HoosierNet, Inc. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 4