- USR-TC - mailman.xmission.com

(usr-tc) Dual power supply NIC for redundant power on newer style (integra ted fan tray) TC chassis?
by Scott Trautman 10 May '00

10 May '00

Hi-- I purchased a "spare" 70a power supply some time ago, now looking to put it in as a redundant (vs. replacement) power supply in a chassis, but see I have no "NIC" in the back for it. Old dual 45a chassis NIC encompassed both power supply slots, with only 1 AC cord, switch; the newer chassis AC/switch only covers the one slot; I'm wondering if: a) I need another same NIC for other slot, but then 2 AC cords/switches or b) There's an alternate NIC that takes up both slots Possibly A or B are "options", but in case A, would it still be "redundant" then or no? Scott Trautman Global Dialog Internet - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) IP Logging / Telnet Password
by Vance McIndoe 09 May '00

09 May '00

If there is no console port access on the NIC, you could try the DIP switches on the NAC. From memory, there's one that causes the password (and possibly the config) to be reset when the card is inserted. Remember to remove the card and change the DIP switch back before re-configuring the card up again, because the config get's cleared each time it boots. >>> greg(a)coastlink.com 10/05/00 08:26:05 >>> Thanks for your info Jeff! I have more questions. > -----Original Message----- > From: owner-usr-tc(a)lists.xmission.com > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jeff Mcadams > Sent: Monday, May 08, 2000 7:11 PM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) IP Logging / Telnet Password > > >Also is there a way to recover or reset the Telnet password to a USR > >Total Control Enterprise Hub. I haven't had access to it before and I > >can't find the password, nor does anyone recall what it was. > > I assume you're talking about Arc at this point. Nope I'm talking about telneting into a Total Control NETServer Card. I get a login prompt and from talking with the last guy who accessed it, it does have a password, he just can't remember it. At some point it was written down, but no one knows where the hardcopy went. Can we gain access if we plug an ethernet cable from a laptop straight into the card? What are our options? Thanks, Greg Long Tech Support Coastlink 801-532-6212 ext 32 greg(a)coastlink.com http://www.coastlink.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. -- Vance McIndoe Data Platforms, Operations, Telecom NZ Ltd. +64-6-3507004 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) IP Logging / Telnet Password
by Greg Long 09 May '00

09 May '00

Thanks for your info Jeff! I have more questions. > -----Original Message----- > From: owner-usr-tc(a)lists.xmission.com > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jeff Mcadams > Sent: Monday, May 08, 2000 7:11 PM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) IP Logging / Telnet Password > > >Also is there a way to recover or reset the Telnet password to a USR > >Total Control Enterprise Hub. I haven't had access to it before and I > >can't find the password, nor does anyone recall what it was. > > I assume you're talking about Arc at this point. Nope I'm talking about telneting into a Total Control NETServer Card. I get a login prompt and from talking with the last guy who accessed it, it does have a password, he just can't remember it. At some point it was written down, but no one knows where the hardcopy went. Can we gain access if we plug an ethernet cable from a laptop straight into the card? What are our options? Thanks, Greg Long Tech Support Coastlink 801-532-6212 ext 32 greg(a)coastlink.com http://www.coastlink.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) FS: USR DSL Modems
by Steve Rivera 09 May '00

09 May '00

3- USR Viper DSL Standalone modems $550ea w/ external power supplies 2 in used condition, 1 unused in original box 3- USR Viper ACL cards $700ea.....sold Worldwide Provider of Network Hardware Since 1981. Steve Rivera - v-732-833-2111 / 732-433-5890 24Hr Email Page 7324335890(a)page.nextel.com (start message with YOUR email address) WAN ACCESS SPECIALIST--- URL's http://www.wrca.net or http://www.ISP-NetworkHardware.com Cisco, Ascend,USR,Adtran, Kentrox,Livingston, Microcom,Computone,BayNetworks, Verilink,IBM,Motorola,UDS,Codex,ATT/Paradyne,Hayes,Racal,GDC,Telebit,MultiTech, Sync/Tylink,Wellfleet,,Black Box,Micom & More - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) MRTG problems...
by Mark Thornton 09 May '00

09 May '00

I have been trying to get the TCH perl scripts that are included with the mrtg application to work, but they continue to return zero's. There are no error messages, and the community string is correct and entered in all of my chassis'. I have tried both the dualt1.pl and the hiperdsp.pl script and both behave the same. It is obvious I am missing something but the docs are slim. What could it be? How should I go about finding the problem? Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 1

(usr-tc) ISDN calls rejected after TCS 3.[56] upgrade
by Ray Bellis 09 May '00

09 May '00

I've only just got around to thinking about upgrading my TCS software. This morning I did a test upgrade to TCS 3.5 on one of my racks, and since then that unit has refused to take any ISDN calls. I'm still using the Munich card since the rack isn't completely full and I don't want to lose inbound ISDN-30 channels just because there aren't any modems left. The ISDN-GW setting is therefore still on 16. Does anyone have any ideas? thanks, Ray. -- Ray Bellis, MA(Oxon) - Technical Director - community internet plc Windsor House, 12 High Street, Kidlington, Oxford, OX5 2PJ tel: +44 1865 856000 email: ray.bellis(a)community.net.uk fax: +44 1865 856001 web: http://www.community.net.uk/ - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) IP Logging / Telnet Password
by Greg Long 08 May '00

08 May '00

Can anyone tell me if there is a configuration option to turn on or off logging of IP addresses within the USR Total Control Enterprise Hub? Do I have to Telnet in to do it? Is there a way to determine IP addresses from Port ID's? Also is there a way to recover or reset the Telnet password to a USR Total Control Enterprise Hub. I haven't had access to it before and I can't find the password, nor does anyone recall what it was. Thanks, Greg Long Technical Support Coastlink 801-532-6212 ext 32 greg(a)coastlink.com http://www.coastlink.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

Re: (usr-tc) Suggested Firmware
by K Mitchell 08 May '00

08 May '00

At 01:36 PM 4/17/00 -0400, Mike Andrews wrote: >No, you should be running 2.0.51 on the DSP's for that... How does 2.0.51 work with 0.49 hardware? -- Kirk Mitchell-General Manager mitch(a)keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 5

(usr-tc) IMAC disconnects
by Wayne Barber 08 May '00

08 May '00

Is anyone else having problems with IMACs disconnecting frequently? We have a couple customers that are having problems with getting dropped soon after they connect (sometimes less than a minute, other times 10-15 minutes later). Other times, they can stay on for hours. Is there some setting on a Mac that can improve this? Thanks, Wayne Barber Coastal Telco Services - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 3

(usr-tc) SBR
by jeff.binkley＠asacomp.com 04 May '00

04 May '00

Ok Folks, I took the plunge and bought the bloated priced SBR Radius software from 3Com. Now where do I start ? This is supposed to be a 3Com version yet I see nothing about the table format for SQL, no .rif file, no VSAs etc.. Can anyone give me a clue where to start ? I've been running the 3Com S&A server and many of these things were included. The SBR manual talks about an IP address pool. is that the same as the address pool in the HiPerArc ? Is there any step-by-step instructions for setting this up with 3Com equipment ? For $3,500 I sure expected more. Jeff Binkley ASA Network Computing - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0