- USR-TC - mailman.xmission.com

(usr-tc) Wierd Happenings
by Steve Cobb 02 Jan '01

02 Jan '01

I just upgraded the software on my DSP amd my ARC on a TC rack at one pop. The DSP is now at 2.1.9 and the ARC is at 4.2.32. after doing this and reseting all cards involved, my configuration was lost, i.e. my users were lost, my radius settings erased etc. Anyway, after correcting the auth and acct settings through telnet, I decided to add the users using TCM. However, I get a bunch of error messages that say "No Data Available @ xxxxxxxxx" where xxxxxxx looks like a SNMP address. I can add a user, I just can edit it, or view networks through TCM. If I add the user through telnet and then enable the user, wierd things start happening like my ARC stops responding to telnet, users can't dialin, etc. Any ideas? All help would be appreciated. Thanks, Steve Cobb Geeksnet - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) RESEND: Problems with relocating modems to a new telco
by Jim Johnson 02 Jan '01

02 Jan '01

We are relocating our modems to a new telco provider's colocation space. We grabbed an old quad chassis for testing the new colo site before the move. The quads are running 6.1.6 code and the Dual PRI card is running the 3.1.5 code. The telco vendor is running Nortel DMS-100 switches. Most of our testing is working fine, but we are having problems with some callers who can connect fine to our old POP and not at all to the new POP. I have this connection problem myself when I test the new pop from my home using a USR 56K modem. I can connect to the new pop at v.34, but not at v.90. When I remove error correction on the modem and use Hyperterm, I do see a lot of line noise. I also had the telco terminate one of the PRI's we are testing in their Cisco NAS box, and I could connect fine into that box from my home at v.90 or v.34. This is really confusing me. I was wondering if the 6.1.86 quad modem code might help, but I can't access it from the total control site even though it has no new features, just bug fixes. (This annoys me since we paid 100K for the four chassis we still own). Anyway, I was wondering if anyone could help me. Obviously, I don't want to switch thousands of users to the new pop until I understand what is happening. If anyone from 3com is montioring the list anymore, maybe you will help with a MIME attachment..... TIA, Jim - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 7

(usr-tc) RADIUS question
by Scott Kupferschmidt 29 Dec '00

29 Dec '00

Hey guys. I have a question regarding RADIUS servers in general. Right now we're using Cistron RADIUS on our main authentication server, works great and all but we're trying to set up a backup RADIUS server as well. That part isn't hard (setting it up) except I don't know what the configuration settings are to make it authenticate off of a different file, not just the system password file. Any ideas? Thanks. Scott - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 4

Re: (usr-tc) FS: Quad Bundles ...Super Cheap...Hiper..
by ddns 26 Dec '00

26 Dec '00

We have shut down our ISP dial in business and we have the following to sell. 3 com total control unit hiper dsp card hiper access router card hipernmc acu 130 amp less than 12 months old little work located in Aust Rod -----Original Message----- From: Steve Rivera -www.wrca.net <sales(a)wrca.net> To: usr-tc(a)lists.xmission.com <usr-tc(a)lists.xmission.com> Date: Wednesday, 20 December 2000 10:49 Subject: (usr-tc) FS: Quad Bundles ...Super Cheap...Hiper.. >Hello Folks, This might sound too good to be true but it is :) They are >configured as follows. Don't be hesitant because of price. They are in >great cosmetic and functional condition. I bought them at a great price and >since it is the giving season I though I could pass the savings to this list :) > >I am always open to opportunity so if you need help with pricing and your a >serious buyer. I will work with you. >Be sure to mention you found it on the USR List. > >HD Chassis with Single 70A Power >NMC >Netserver PRI >Dual PRI >12 Quad Digital Modems > >1-5 $2000 >6-10 $1750 >11-15 $1500 > >Hiper DSP $3000 >Hiper ARC $2000 >Hiper NMC $1000 >Dual PRI/E1 $650...Hard to Find > >As usual I guarantee all equipment working. > >If you are looking anything USR/3Com Total Control, Netservers, MP, MMP's, >nic,macs, parts ect. >YEAH I GOT THAT :) > >Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr >(www.isp-networkhardware.com) >Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com > >Worldwide Provider of Network Hardware Since 1981. > > > > > > > > > > > > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) NMC chassis alarm LED
by Lists 26 Dec '00

26 Dec '00

Does anyone know of an easy way to read the status of the NMC chassis alarm LED? Ideally a simple read that returned an integer indicating the LED colour. So far I've been unable to find an object that didn't require a lot of parsing. Any ideas? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 3

(usr-tc) TC1000 For Sale
by Joshua_D._Sargent＠sonnenschein.com 26 Dec '00

26 Dec '00

Happy Holidays Everyone! I've got one populated TC1000 for sale in EXCELLENT condition. Here's the specs: 12 - Quad v.34 Digital Modems 1 - Dual PRI NAC 1 - Netserver PRI 1 - NMC 1 - Ethernet NIC 1 - High Speed WAN/Ethernet NIC Console 1 - Dual T1/DS-1 NIC 2 - 70A Power Supplies UNIT IS IN EXCELLENT CONDITION! CONTACT OFF-LIST FOR PICTURES. $2,000 + Actual Shipping (Your preferred method) Josh Sargent js4(a)sonnenschein.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) recommendation for sources of HiPER ARC card
by Antonio Querubin 26 Dec '00

26 Dec '00

I'm looking for recommendations on sources for a HiPER ARC router card, preferably new but good used condition is also acceptable. Anybody got any particular favorite suppliers? If so please email me in private. Thanks. Antonio Querubin tony(a)lava.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) FS: USR/3Com Hiper Edgserver Bundle and cards.
by Steve Rivera -www.wrca.net 26 Dec '00

26 Dec '00

WR Communication Associates has the following USR/3Com Hardware available: 1- High Density Chassis w/ single 70A power 1- EdgeServer with Scsi and Ethernet nic 1- Hiper NMC 1- Hiper ARC 2- Hiper DSP w/ edgserver ...asking $8500. without edgserver ...Asking $7750. Also have individual cards like: Hiper NMC Hiper ARC Hiper DSP Quad Digital Modems Quad Analog Modems NMC Netserver PRI Dual PRI/T1 Dual PRI/E1 Dual T1/E1 Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr (www.isp-networkhardware.com) Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) FS: **NEW** Hiper DSP and bundles, Refurb DSP, ARC, NMC..ect
by Steve Rivera -www.wrca.net 21 Dec '00

21 Dec '00

Happy Holidays Guys, I have These NEW Hiper DSP cards available. They are New in box with factory warranty. Hence the Term NEW. Asking $3700.00 per set I also have the ** NEW ** 3Com 1000 ISP Bundles ** NEW ** Priced to compete with the 3Com's best tiered distributors. I also have refurbished : Hiper Bundles $8500 Hiper DSP sets at $3000 (T1 version) Hiper ARC's $1700.00 Hiper NMC's $1000.00 EdgeServer $1000.00 Also have 15 - Quad Bundles.....looking to move :0 I am also working on information and availability on the New and Upcoming HD96 port modem cards. Try me for all your Total Control Needs....manuals, parts, quad equipment, cables..ect Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr (www.isp-networkhardware.com) Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) DMS-500 and NI-2 Problems
by G. Douglas Davidson 21 Dec '00

21 Dec '00

On Dec 21, 11:21am, Jim Johnson wrote: > Subject: Re: (usr-tc) DMS-500 and NI-2 Problems > > We are setting up a new POP and ran into that same problem initially. > > I'll bet if you use TCM and issue the command "Local In Service" to the > PRI card, the calls will start coming in. > > There is a setting in the DMS-500 switch to "emulate" an AT&T switch. > This will cause the D-Channels to come up properly when you reset the > card. The phone company needs to set this for you. > > I hate switching telcos... Thanks for the pointer. I went ahead and issued Local In Service, with and without Service Messages, in TCM and in command line on the DSP and I am still having issues, but that sort of makes sense since NI-2 does not support service messages. I have emailed the telco to have them set up the emulation though (or try to have them do it.) With this emulation in place, are you still using NI-2 or can you then set things up to use an AT&T 5ess? Thanks again! > > Regards, > > Jim > > "G. Douglas Davidson" wrote: > > > > We are in the process of setting up some new PRIs and things ain't going so > > well. We have to use the NI-2 interface, as it seems to be the only one > > supported by the CLEC. Everything looks just swell on this side, yet we are > > getting "all circuits busy" when we attempt to use the lines. > > > > Turned off service messaging as per one of the list suggestions. Running DSP > > 2.1.9. D-Channel is up. Things look good. > > > > Thanks for any suggestions. > > > > span1> dis atstat > > > > Tslot Status Modem Status Call ID Action Q931 > > Connect Srvc State Queued Ref > > 01 Idle N/A IS 0x00000000 NONE 0x00000000 > > ... > > 23 Idle N/A IS 0x00000000 NONE 0x00000000 > > 24 Dchan N/A IS 0x00000000 NONE 0x00000000 > > > > span1> dis ccrcfig > > Span1 Configured Signal Mode is (sigmode): MESSAGE ORIENTED > > Span1 Signal Mode Active is: MESSAGE ORIENTED > > Span1 DNIS Enable is (dnisena): DNIS ADDRESS > > Span1 Dial Out Address Delay (doadrdly): 70 ms > > Span1 Configured Switch Type is (swtype): NI2 > > Span1 Idle Byte is (idlebyte): 0xFE > > Span1 Ana Calls Blocked Err Code (ancbec): 58 > > Span1 Digi Calls Blocked Err Code (dcbec): 58 > > Span1 No IGWS Avail Err Code (noigwsav): 58 > > Span1 Chan Blocked Err Code (chanblck): 58 > > Span1 Block Call Type is (blcaltyp): BLOCK NONE > > Span1 Tone Type is (tonetype): DTMF TONE > > Span1 Number Of DTMF Tones is (numdtmft): 4 > > Span1 Dial Out Select Direction (dseldir): DOWN > > Span1 Dial Out Next Timeslot (dntslot): 24 > > Span1 Alert Message Mode (alrtmsg): ALRT MSG MODE DISABLED > > Span1 CALL PROC Message Mode (cprocmsg): CALLPROC MSG MODE ENABLED > > Span1 Overlap Receiving Mode (ovrrxmode): OVERLAP RECEIVE MODE DISABLED > > Span1 Timeout between INFO msg(inftmout): 12 > > Span1 Total Number of Digits (inbdnisln): 12 > > Span1 Signaling Group Type is: FAS > > Span1 Configured SS7 signal mode is: None > > Span1 active SS7 signal mode is: None > > > > span1> dis spnstats > > Span1 Near Time Elapsed is: 653 seconds > > Span1 Near Valid Intervals is: 69 > > Span1 Line Status is: > > NO ALARM = TRUE > > RCV FAR END LOF = FALSE > > XMT FAR END LOF = FALSE > > RCV AIS = FALSE > > XMT AIS = FALSE > > OUT OF FRAME = FALSE > > LOSS OF SIGNAL = FALSE > > LOOPBACK STATE = FALSE > > T16 AIS = FALSE > > RCV FAR END LOMF = FALSE > > XMT FAR END LOMF = FALSE > > RCV TEST CODE = FALSE > > OTHER FAILURE = FALSE > > Span1 Send Code is: SEND NO CODE > > Span1 dsx1 Loopback Configuration is: NO LOOP > > Span1 Receiver Gain is: 0.0 dB GAIN (2.9 dB Steps) > > Span1 Continuous CRC Error is: FALSE > > Span1 Physical State is: F1 OPERATIONAL > > Span1 Loopback Init Originate is: NONE > > Span1 Modem Not Available Count is: 0 > > Span1 Invalid Bearer Capability Count is: 0 > > Span1 Invalid Channel ID Count is: 0 > > Span1 Invalid Progress Indicator Count is: 0 > > Span1 Invalid Calling Party Count is: 0 > > Span1 Invalid Called Party Count is: 0 > > Span1 Call Block Failure Count is: 0 > > Span1 No Ring Off Failure Count is: 0 > > Span1 Telco Disconnect Failure Count is: 0 > > Span1 TELCO Failed To Wink Count is: 0 > > Span1 TELCO Wink Too Short Count is: 0 > > Span1 No Channel Available Count is: 0 > > Span1 Dial In No Resp To Disc Count is: 0 > > Span1 Dial Out No Resp To Disc Count is: 0 > > Span1 Gnd Start No Resp To Disc Count is: 0 > > Span1 Switch Type Active is: NI2 > > Span1 D-channel Operational is: UP > > Span1 Signal Mode Active is: MESSAGE ORIENTED > > Span1 Service Messages Sent: 0 > > Span1 Service Ack Messages Received: 0 > > > > -- > > ----- > > G Douglas Davidson | CityNet, Inc. > > douglas(a)city-net.com | Pittsburgh, PA > > voice: 412.481.5406 | fax: 412.431.1315 > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. >-- End of excerpt from Jim Johnson -- ----- G Douglas Davidson | CityNet, Inc. douglas(a)city-net.com | Pittsburgh, PA voice: 412.481.5406 | fax: 412.431.1315 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0