- USR-TC - mailman.xmission.com

Re: [USR-TC] v.92... 3com's ripoff/joke plan
by Lisa Casey 22 Apr '02

22 Apr '02

Hi, How can one tell if their NMC is a 486 or a pentium class? Thanks, Lisa Casey ----- Original Message ----- From: "John Mies" <john(a)cambert.com> To: <usr-tc(a)mailman.xmission.com> Sent: Tuesday, April 16, 2002 7:11 PM Subject: Re: [USR-TC] v.92... 3com's ripoff/joke plan > After a few emails from members of this group, I discovered that the vendor > I bought this chassis from in Feb. 1999 slipped me a 486 NMC rather than a > Hiper NMC. I notified the vendor about this, and they admitted I should > have gotten a Hiper NMC, but have heard no more from them. If I don't get a > replacement from them, I'll divulge their name so they can avoid doing > business with this company.

7 6

Repost- How to change TCH AAA port num
by Meng Tsai 22 Apr '02

22 Apr '02

(Appologizing for the previous post with wrong coding ) --- Our TCH Netserver software version ----------- command> version U.S. Robotics Total Control (tm) NETServer Card V.34/ISDN with Frame Relay V3.6.28 Build date: Oct 2 1997 Build time: 14:42:06 Network Interface Card: Ethernet & Frame Relay Combination (26) ISDN Interface Card : MUNICH32 (4) Packet Bus Circuit : Standard ------------------ Please advise the command syntax on how to change Q1: the Radius AUTHENTICATION PORT form default 1645 to 1812 Q2: the Radius ACCOUNTING PORT form default 1646 to 1813 -- tsaim(a)mft.com

2 1

How to change TCH AAA port num
by Meng Tsai 20 Apr '02

20 Apr '02

--- Our TCH Netserver software version ----------- command> version U.S. Robotics Total Control (tm) NETServer Card V.34/ISDN with Frame Relay V3.6.28 Build date: Oct 2 1997 Build time: 14:42:06 Network Interface Card: Ethernet & Frame Relay Combination (26) ISDN Interface Card : MUNICH32 (4) Packet Bus Circuit : Standard ------------------ Please advise the command syntax on how to change Q1: the Radius AUTHENTICATION PORT form default 1645 to 1812 Q2: the Radius ACCOUNTING PORT form default 1646 to 1813 thanks in adv.

1 0

Viper and Cellux sets
by Stephen Rivera - WRCA.Net 19 Apr '02

19 Apr '02

Available now...Counter offers accepted. 4- Viper Modem - Stand Alone $450 (1 has no power but works $300) 1- ADSL - Cellux OC3-MMF card set $600 some odds and ends... 2- USR Sportster ISDN 128K (new in box) $150 Steve Rivera 732-833-2111 x102 IM: srivera711 732-833-2115 fax for more product info got www.wrca.net Jackson, NJ 08527 (USA)

1 0

RE: [USR-TC] Filtering telnet / tftp / snmp traffic to the hiperarc
by Luke Dudney 18 Apr '02

18 Apr '02

I've figured this out. The way to do it does not involve filters at all, and for anyone that's wondering (or anyone that hasnt done the following) here are the steps I took: delete tftp client 0.0.0.0 add tftp client 10.0.1.1 add tftp client 192.168.1.1 < you can only specify individual hosts here, not subnets > add snmp community_pool admin address 10.0.1.1 add snmp community_pool admin address 192.168.1.1 < ditto here > add snmp community readonlycommunity access RO community_pool admin validate_address use_pool address 0.0.0.0 add snmp community readwritecommunity access RW community_pool admin validate_address use_pool address 0.0.0.0 add telnet client 10.0.1.0/24 add telnet client 192.168.1.0/24 enable telnet client_access Easy when you know how. Cheers Luke > -----Original Message----- > From: Luke Dudney > Sent: Thursday, 18 April 2002 10:10 AM > To: usr-tc(a)mailman.xmission.com > Subject: [USR-TC] Filtering telnet / tftp / snmp traffic to > the hiperarc > > > Hi > I've been through the list archives but haven't found > anything very relevant. > > I have a Hiperarc, say 10.0.0.1. > Our administrative networks are 10.0.1.0/24 and 192.168.1.0/24 > > I want to reject telnet, tftp and snmp access to the hiperarc > from any address not in the admin networks. > I want to permit all other traffic through the hiperarc. > > I am assuming this will be done with filters but I've spent > the better part of a day trying to nut out a filter for this > but I'm just banging me head into a brick wall. > > Thanks > Luke > > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > >

5 4

Filtering telnet / tftp / snmp traffic to the hiperarc
by Luke Dudney 17 Apr '02

17 Apr '02

Hi I've been through the list archives but haven't found anything very relevant. I have a Hiperarc, say 10.0.0.1. Our administrative networks are 10.0.1.0/24 and 192.168.1.0/24 I want to reject telnet, tftp and snmp access to the hiperarc from any address not in the admin networks. I want to permit all other traffic through the hiperarc. I am assuming this will be done with filters but I've spent the better part of a day trying to nut out a filter for this but I'm just banging me head into a brick wall. Thanks Luke

1 0

3Com NMCII, ARCII, MultiSpan
by Stephen Rivera - WRCA.Net 17 Apr '02

17 Apr '02

Couple more things that came in.... "I'm not Ebay but I will Negotiate " :) Hiper II DSP 96 port V.90 ,V.92 Modem Card set T-1/E-1 Nic .96 Channels per Card .Three E-1 or Four T-1 Spans per card Quaintly ( 1 ) Hiper Access Router Card II 128 megs with Dual 10/100 Pci Ethernet Nic .Routes up to 672 Calls .Supports More than 2000 VPN Tunnels .Offers Wire Speed triple DES encryption .Supports Ethernet, Fast Ethernet , Frame Relay and ATM Quaintly ( 1 ) Hiper Network Management Card II (NMC II) with NMC Ethernet Nic .333 MHz Intel Pentium II Processor .On Board 128 MB ( Upgradeable to 256 MB ) .32 MB Flash Ram ( Upgradeable to 64 MB ) Quaintly ( 1 ) Steve Rivera 732-833-2111 x102 IM: srivera711 732-833-2115 fax for more product info got www.wrca.net Jackson, NJ 08527 (USA)

1 0

RE: [USR-TC] v.92... 3com's ripoff/joke plan
by SWujek＠solunet.com 17 Apr '02

17 Apr '02

Hi John, I would definitely pursue getting your HiperNMC because the 486 NMC cards are End-of-Life! That means if it breaks you CANNOT get it replaced or repaired. If it breaks take it out of your chassis and use it as a doorstop or take it skeet-shooting and use it as a clay pigeon. The 486 NMC cards are two generations old, having been replaced by the HiperNMC and the NMC(333). You can identify the 486 NMC through an Inventory in Total Control Manager software or by looking at the front of the card: The 486 NMC cards will say in white letters "Network Mgt Card", the Hiper NMC will say "Hiper NMC" and the NMC(333) will say "NMC". Thanks, Steve Solunet TAC -----Original Message----- From: John Mies [mailto:john@cambert.com] Sent: Tuesday, April 16, 2002 7:11 PM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] v.92... 3com's ripoff/joke plan After a few emails from members of this group, I discovered that the vendor I bought this chassis from in Feb. 1999 slipped me a 486 NMC rather than a Hiper NMC. I notified the vendor about this, and they admitted I should have gotten a Hiper NMC, but have heard no more from them. If I don't get a replacement from them, I'll divulge their name so they can avoid doing business with this company. At 11:21 AM 3/7/02 -0800, you wrote: >This isn't to bad.. It could be alot worse. $750 to upgrade the ARCs is a >good price, I think they go for between $3k and $4k new. (wont find these >newer ones on the used market I bet) and Upping the NMC for $2500 is a great >deal.. Who are you getting them through? My sources quoted me a little >higher.. > >-Steve > >On Thursday 07 March 2002 10:59 am, you wrote: > > I just received the word today from my support people what it would take to > > upgrade to v.92. I bought my chassis in February, 1999. > > > > 1. Need to send the current ARC in for memory upgrade to 128. Memory needs > > to be soldered in. Cost - $750. Will give me a loaner ARC for a $2500 > > deposit. > > > > 2. Need to upgrade (replace) the 486 NMC to Pentium. Cost - $2,500. > > > > 3. Newest software version (I already downloaded it from my current support > > plan). > > > > Total cost to upgrade: $3,250. > > > > At 12:21 PM 2/26/02 -0600, WayneG wrote: > > >Actually that's incorrect. > > > It will only cost the price of a software-only service contract for a > > >base chassis, which is around $650-$700. I find this to be a reasonable > > >cost, considering the glut of used TC equipment (super low cost) > > > available. > > > > > > -Wayne > > > > > > > > >----- Original Message ----- > > > > From: "Ed Taylor" <ed(a)1st.net> > > > > >To: <usr-tc(a)mailman.xmission.com> > > >Cc: <WayneG(a)uplogon.com> > > >Sent: Tuesday, February 26, 2002 11:59 AM > > >Subject: RE: [USR-TC] v.92... 3com's ripoff/joke plan > > > > > > > Yes you would need to pay an extra $2700 for the v.92 Software update. > > > > It is calculated per port... > > > > > > > > It's a another 3com classic ripoff. > > > > > > > > -- > > > > Edgar D. Taylor > > > > President/CEO > > > > FIRST USA Inc. > > > > Voice: (800)716-6190 > > > > Email: ed(a)1st.net > > > > Web: www.1st.net > > > > -- > > > > > >_______________________________________________ > > >USR-TC mailing list > > >USR-TC(a)mailman.xmission.com > > >http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

Re: [USR-TC] v.92... 3com's ripoff/joke plan
by John Mies 16 Apr '02

16 Apr '02

I just received the word today from my support people what it would take to upgrade to v.92. I bought my chassis in February, 1999. 1. Need to send the current ARC in for memory upgrade to 128. Memory needs to be soldered in. Cost - $750. Will give me a loaner ARC for a $2500 deposit. 2. Need to upgrade (replace) the 486 NMC to Pentium. Cost - $2,500. 3. Newest software version (I already downloaded it from my current support plan). Total cost to upgrade: $3,250. At 12:21 PM 2/26/02 -0600, WayneG wrote: >Actually that's incorrect. > It will only cost the price of a software-only service contract for a >base chassis, which is around $650-$700. I find this to be a reasonable >cost, considering the glut of used TC equipment (super low cost) available. > > -Wayne > > >----- Original Message ----- >From: "Ed Taylor" <ed(a)1st.net> >To: <usr-tc(a)mailman.xmission.com> >Cc: <WayneG(a)uplogon.com> >Sent: Tuesday, February 26, 2002 11:59 AM >Subject: RE: [USR-TC] v.92... 3com's ripoff/joke plan > > > > Yes you would need to pay an extra $2700 for the v.92 Software update. > > It is calculated per port... > > > > It's a another 3com classic ripoff. > > > > -- > > Edgar D. Taylor > > President/CEO > > FIRST USA Inc. > > Voice: (800)716-6190 > > Email: ed(a)1st.net > > Web: www.1st.net > > -- > > > > >_______________________________________________ >USR-TC mailing list >USR-TC(a)mailman.xmission.com >http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > >-=-=- >SBG-Priority: 4 (Low) http://www.internz.com/SpamBeGone/

5 8

Total Control harwdare - hiper bundles
by Stephen Rivera - WRCA.Net 16 Apr '02

16 Apr '02

Open to counter offers... Hiper NMC $1800 Hiper ARC (64MB) $1000 Hiper ARC (128MB) $1500 Hiper ARC II $2500 MP 16v34 $250 All I-Modem pools and terminal servers available $7000.00 Chassis with dual 70a power hiper nmc hiper ARC II (2nd Generation) 2x Hiper DSP $5500.00 Chassis with dual 70a power hiper nmc hiper ARC (64MB) 2x Hiper DSP $2250.00 Chassis with single 70a power nmc v90 hiper arc (64mb) 12x Quad Digital modem Dual Pri $1100.00 Chassis with single 70a power nmc v90 netserver pri 12x Quad Digital modem Dual Pri Also have adtran, cisco, Livingston, ascend, kentrox, motorola in stock. Steve Rivera 732-833-2111 x102 IM: srivera711 732-833-2115 fax for more product info got www.wrca.net Jackson, NJ 08527 (USA)

1 0