January 2007 - USR-TC - mailman.xmission.com

RE: [USR-TC] This page can't be displayed!!
by Adam Barnhill 06 Feb '07

06 Feb '07

Kirti, We once saw similar issues due to an MTU setting. Might be something to check out. Adam -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Kirti S. Bajwa Sent: Monday, January 30, 2006 8:47 AM To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Subject: RE: [USR-TC] This page can't be displayed!! Simple. When some users connect to the internet using dial-in, they have no problem connecting to our network. But when they try to connect out of our network, such as yahoo, they get a message "this page can't be displayed". It happens intermittently. Any suggestion? Kirti -----Original Message----- From: usr-tc-bounces+kbajwa=tibonline.net(a)mailman.xmission.com [mailto:usr-tc-bounces+kbajwa=tibonline.net@mailman.xmission.com] On Behalf Of Todd Sent: Monday, January 30, 2006 8:11 AM To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Subject: RE: [USR-TC] This page can't be displayed!! What's your problem Kirti? I may be able to help. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com(a)mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Kirti S. Bajwa Sent: Saturday, January 28, 2006 6:50 PM To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Subject: RE: [USR-TC] This page can't be displayed!! Charles: This is a typo. Each pool is 24. FYI, 3COM assigns the IP address with no problem. Back to my original problem. I hope you can help. Kirti -----Original Message----- From: usr-tc-bounces+kbajwa=tibonline.net(a)mailman.xmission.com [mailto:usr-tc-bounces+kbajwa=tibonline.net@mailman.xmission.com] On Behalf Of Charles Sprickman Sent: Saturday, January 28, 2006 6:32 PM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] This page can't be displayed!! On Sat, 28 Jan 2006, Kirti S. Bajwa wrote: > ARC1(Port 15) 12.21.237.241 IP Pool: 12.21.237.48/31 > ARC2(Port 16) 12.21.237.242 IP Pool: 12.21.237.96/31 If that's not a typo, those pools each contain only two IP addresses... That would cause problems. Charles > Kirti > > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

7 12

RE: IP Pool and Gateway of Total Control
by Mohsen 23 Jan '07

23 Jan '07

Dear All The problem that I had with different IP pool range other than the IP network of Hiper ARC is solved. I used NAT feature. I loaded the 5.3.2 Hiper ARC software to the card which Have the NAT Feature. But I think that from software 4.2 it has nat feature. Then setup nat in the card.It seems working fine. Best Regards, Mohsen ____________________________________________________________________________________ It's here! Your new message! Get new email alerts with the free Yahoo! Toolbar. http://tools.search.yahoo.com/toolbar/features/mail/

1 0

IP Pool and Gateway of Total Control
by Mohsen 22 Jan '07

22 Jan '07

Dear All I need to set public IP address on hiper arc interface and private IP address pool , but when configured it the user connect to system couldn't browse internet. for example the setting is as below : Hiper ARC interface IP address : 212.200.200.10 Default Gateway : 212.200.200.1 IP Pool : 192.168.100.1 size 60 the user connect to the system and get ip address from pool but they can't ping for example 192.9.9.3. Please guide me if this is possible and what should I do ? Thanks __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

6 9

RE: [USR-TC] RE: IP Pool and Gateway of Total Control
by Terry Rimmer 08 Jan '07

08 Jan '07

-----Original Message----- From: "Mohsen" <mohsen1380(a)yahoo.com> To: "usr-tc(a)mailman.xmission.com" <usr-tc(a)mailman.xmission.com> Sent: 01/07/07 8:49 AM Subject: [USR-TC] RE: IP Pool and Gateway of Total Control Dear All thanks for your replies. I've enabled the proxy_arp all dial_ip but nothing happen and I also try to nat but I can't do it. if u could help me more ? __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

RE: IP Pool and Gateway of Total Control
by Mohsen 07 Jan '07

07 Jan '07

Dear All thanks for your replies. I've enabled the proxy_arp all dial_ip but nothing happen and I also try to nat but I can't do it. if u could help me more ? __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

3Com TC1000 Hiper DSP Clearance Sale !!
by Choi 06 Jan '07

06 Jan '07

1 0

Re: [USR-TC] IP Pool and Gateway of Total Control
by Mohsen 04 Jan '07

04 Jan '07

Mohsen wrote: > Dear All I need to set public IP address on hiper arc interface and > private IP address pool , but when configured it the user connect to > system couldn't browse internet. for example the setting is as below > : > > Hiper ARC interface IP address : 212.200.200.10 Default Gateway : > 212.200.200.1 > > IP Pool : 192.168.100.1 size 60 > > the user connect to the system and get ip address from pool but they > can't ping for example 192.9.9.3. > > Please guide me if this is possible and what should I do ? Wayne wrote : >Are the users able to ping the HiperARC's IP address? >How about the default gateway? >What kind of device is acting as the default gateway? >In order to use private IP addresses in that way you will need to NAT >those addresses behind a public IP address. I've never experimented >with NAT on the HiperARC. In fact, I'm not even sure if it supports it. > However, that is not to say that you can't perform the NAT on another >device in front of the HiperARC - e.g. a router or PC. Thank Wayne for your response. the user can ping the Hiper ARC interface , but he can'y ping the default gateway. The Gateway is a ADSL Modem. Could you guide me on NAT feature of Total Control ? Good Luck __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0