February 2005 - USR-TC - mailman.xmission.com

RE: [USR-TC] 3COM settings
by Adam Barnhill 18 Feb '05

18 Feb '05

Are you resetting both sides or just the NAK (front)? Consistent span problems would indicate a problem with the span/Cat5/NIC. Are these PRI, ChT1, or E1/R2? What kind of problems do they have? Abnormal LEDs or Line/Code Violations? -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Geoffrey Deasey Sent: Wednesday, February 16, 2005 9:17 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] 3COM settings What version of code is recommended on a chassis with: 2 70A power supplys 1 HyperArc 7 HyperDSP 1 NMC (some have HyperNMC;s) Every day a different pri has errors, the only thing that seems to clear it is to pop the card out and re-insert. Thanks Geoffrey Deasey VP Systems Netpath, Inc. (336) 226-0425 www.netpath.net Alvarion certified wireless network engineer _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

RE: [USR-TC] 3COM settings
by Adam Barnhill 16 Feb '05

16 Feb '05

The version you should run is largely dependent on the memory configuration and generation of each card within the chassis. If HiperARC is 128/16 and chassis is all Hiper, V.92 code can be used. Remember that TCM does not support TCS 4.7, should you choose to upgrade. If any non-Hiper cards in chassis, TCS 4.3 should be used. Although you can upgrade the HiperDSPs to TCS 4.5/4.7 for increased bugfixes, as long as you don't enable V.92/V.44 features. http://support.utstar.com/Matrixs/TCSMatrix.cfm -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Geoffrey Deasey Sent: Wednesday, February 16, 2005 9:17 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] 3COM settings What version of code is recommended on a chassis with: 2 70A power supplys 1 HyperArc 7 HyperDSP 1 NMC (some have HyperNMC;s) Every day a different pri has errors, the only thing that seems to clear it is to pop the card out and re-insert. Thanks Geoffrey Deasey VP Systems Netpath, Inc. (336) 226-0425 www.netpath.net Alvarion certified wireless network engineer _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

3COM settings
by Kirti S. Bajwa 16 Feb '05

16 Feb '05

Hello: Our 3COM chassis is up and initial tests shows that it is working. Since there are users logged on to the chassis, how should I make changes to the settings? Is it possible to make changes via TCM & no user is disconnected? Kirti

3 2

RE: [USR-TC] DSP Calls Not Dropping Past Channel 9
by Adam Barnhill 16 Feb '05

16 Feb '05

Sometimes this will happen if your DSPs go bad and sometimes it will autodisable certain trunks if the Cat5 or T1 has span problems. Verify through TCM that your channels are not going LOOS (Local Out of Service). If they are going 'Remote out of service' it could be the Cat5 or incorrect switch type. LOOS problems are a little more difficult to counter. Check for errors on the T and verify the Cat5. You can also find solutions in the knowledgebase. http://support.utstar.com/ -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Terry Rimmer Sent: Wednesday, February 16, 2005 8:44 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] DSP Calls Not Dropping Past Channel 9 I have had this problem before and had to reset the T-1 cards to free up the other channels. Thanks, Terry Rimmer -----Original Message----- From: usr-tc-bounces+trimmer=teleflora.com(a)mailman.xmission.com [mailto:usr-tc-bounces+trimmer=teleflora.com@mailman.xmission.com] Sent: Wednesday, February 16, 2005 2:36 AM To: usr-tc(a)lists.xmission.com Subject: [USR-TC] DSP Calls Not Dropping Past Channel 9 have users complaining about busy signals, when checking the connections, it looks like no calls get past channel 9 ever, and during peak times, customers are experiencing busy signals. This just started all of a sudden with no changes on the Chassis, or the configuration of any of the cards. We have a single DSP, Single HiperARC Can anyone give me a clue of what to search for on this? Thanks, Rodney _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

RE: [USR-TC] DSP Calls Not Dropping Past Channel 9
by Terry Rimmer 16 Feb '05

16 Feb '05

I have had this problem before and had to reset the T-1 cards to free up the other channels. Thanks, Terry Rimmer -----Original Message----- From: usr-tc-bounces+trimmer=teleflora.com(a)mailman.xmission.com [mailto:usr-tc-bounces+trimmer=teleflora.com@mailman.xmission.com] Sent: Wednesday, February 16, 2005 2:36 AM To: usr-tc(a)lists.xmission.com Subject: [USR-TC] DSP Calls Not Dropping Past Channel 9 have users complaining about busy signals, when checking the connections, it looks like no calls get past channel 9 ever, and during peak times, customers are experiencing busy signals. This just started all of a sudden with no changes on the Chassis, or the configuration of any of the cards. We have a single DSP, Single HiperARC Can anyone give me a clue of what to search for on this? Thanks, Rodney _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

DSP Calls Not Dropping Past Channel 9
by Rodney Rindels 16 Feb '05

16 Feb '05

have users complaining about busy signals, when checking the connections, it looks like no calls get past channel 9 ever, and during peak times, customers are experiencing busy signals. This just started all of a sudden with no changes on the Chassis, or the configuration of any of the cards. We have a single DSP, Single HiperARC Can anyone give me a clue of what to search for on this? Thanks, Rodney

2 1

Looking for 130A DC power sets
by Stephen Rivera - WRCA.Net 15 Feb '05

15 Feb '05

Hey Guys, Anybody have any of the following available. DC 130A power sets DC 70A power sets Sportster 33.6 w/ power supplies **Anybody have a need for MultiSpan cards (T1) Have about 7 available. Let me know. Steve Rivera WR Consultant Associates, Inc. Dir: 732-833-2111 x102 IM: srivera711 www.wrca.net Providing Network Hardware Since 1981.

1 0

Time logged on!
by Kirti S. Bajwa 10 Feb '05

10 Feb '05

Hello: I can display users connected to the 3COn by 'show all connections'. Is there any command which shows how long each user is logged on to the system? Kirti

2 1

Re: SNMP Scripting directed to USR-TC NMC
by usrtc 09 Feb '05

09 Feb '05

snmpwalk .1.3.6.1.4.1.429.1.6.9.1.1.4.<modemNumber> is what I have been looking for except that I need to expand the output to show a list of 'all' Called-Station-ID info for all current connections. Does anyone know what change to <modemNumber> parameter possible wildcard like *.* would produce a complete list for _current_ connections? Or if it is even possible? Any help appreciated - Thanks Dave > On Tue, 8 Feb 2005, Ben Winslow wrote: > > > On Tue, 2005-02-08 at 08:50 -0600, Duracom Support wrote: > > > I can do that also, but I am needing to know how many people we have > > > connected to each dial in number, for trunking purposes. I run mrtg to > > > query my boxes for number of users dialed in, but I need to be able to tell > > > the number of users dialed in to each dial in number. Since we have Mux > > > solution we have about 15 cities pointed to 5 PRI's, so there is no way to > > > segement by each PRI because there can be random numbers on every PRI. > > > > The TC should send the calling and called directory numbers to your > > RADIUS server in the Calling-Station-Id and Called-Station-Id > > attributes, respectively (at least so long as it can get that info in > > the first place--try LIST DNIS_CONNECTIONS via telnet to the ARC.) > > Whether or not your RADIUS server keeps those around or discards them is > > another story, though... > > > > If you're insistent on SNMP, you can get both numbers from the NMC with > > enterprises.usRobotics.nas.mdm.mdmCs.mdmCsTable.mdmCsEntry.mdmCsLastNumberDialedIn.<modemNumber> and enterprises.usRobotics.nas.mdm.mdmCs.mdmCsTable.mdmCsEntry.mdmCsLastCallingPartyNum.<modemNumber> (.1.3.6.1.4.1.429.1.6.9.1.1.4.<modemNumber> and .1.3.6.1.4.1.429.1.6.9.1.1.5.<modemNumber>); modemNumber is slotNumber*1000 + modemNumber, so slot:4/mod:6 would be 4006. > > > > > Thanks, > > > > > > > > > Kris > > > > -- > > Ben Winslow <rain(a)bluecherry.net> > > > > > > _______________________________________________ > > USR-TC mailing list > > USR-TC(a)mailman.xmission.com > > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > >

5 4

Subject: RE: [USR-TC] Web Connection problem
by Egnatoff, Billy 09 Feb '05

09 Feb '05

Kirti, Have you tried using the command "mon ppp" to view the users session. It will provide you with the protocols, source ip addrs, dest ip addrs, acknowledgments and etc. It might help you determine what/how your clients are communicating across the wire. Bill.Egnatoff(a)hit.cendant.com -----Original Message----- From: usr-tc-request(a)mailman.xmission.com [mailto:usr-tc-request@mailman.xmission.com] Sent: Monday, February 07, 2005 6:59 PM To: usr-tc(a)mailman.xmission.com Subject: USR-TC Digest, Vol 24, Issue 4 Send USR-TC mailing list submissions to usr-tc(a)mailman.xmission.com To subscribe or unsubscribe via the World Wide Web, visit http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc or, via email, send a message with subject or body 'help' to usr-tc-request(a)mailman.xmission.com You can reach the person managing the list at usr-tc-owner(a)mailman.xmission.com When replying, please edit your Subject line so it is more specific than "Re: Contents of USR-TC digest..." Today's Topics: 1. RE: Web Connection problem (Kirti S. Bajwa) 2. RE: Web Connection problem (Kirti S. Bajwa) 3. RE: Web Connection problem (Joel - Fox Computers) 4. USR Scripting (Duracom Support) 5. Re: USR Scripting (GiGoNET Support) ---------------------------------------------------------------------- Message: 1 Date: Fri, 4 Feb 2005 10:28:29 -0500 From: "Kirti S. Bajwa" <kbajwa(a)tib.com> Subject: RE: [USR-TC] Web Connection problem To: "'Discussion relating to the 3Com/US Robotics Total Control modem systems.'" <usr-tc(a)mailman.xmission.com> Message-ID: <4B51F7FF1CDFD811A32A0020ED31AFEE1276B9@TESUQUE> Content-Type: text/plain; charset="ISO-8859-1" Adam: I am learning 3COM. So I need your /help/ further. Where are the MTU settings? Kirti -----Original Message----- From: Adam Barnhill [mailto:adam@semo.net] Sent: Thursday, February 03, 2005 5:40 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] Web Connection problem That kind of sounds like an MTU problem we had in the past. Is your PPP MTU set at default? I believe that is 1514 -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Kirti S. Bajwa Sent: Thursday, February 03, 2005 4:21 PM To: 'Discussion relating to the 3Com/US Robotics Total Control modemsystems.' Subject: [USR-TC] Web Connection problem Hello List: Please /help/ with this strange problem. I am testing a 3COM box. When I dial-in onto 3COM & connect to http://www.tib.com (which is our web site), it connects with no problem. Similarly, I can connect to numerious other web sites. However, when I try connecting www.msn.com or www.riteaid.net, it never connects. There are few other web sites with the same problem. When I try to sign-in into MSN Messenger, same problem. Such connection can not be made. I have spent the last two days on this problem trying to figure out what to do. FYI, I can issue: HiPer> resolve name msn.com and it does resolve the address. Similarly, I can resolve address of 'riteaid.net' and just about any other web site I have tried. I have disabled 'cache' & ncache' on HiPer ARC. I have no idea what else to do. Please /help/ or give suggestions!!\ FYI, I have no such problem with our production system which uses a different type of dial-in modem bank (instead of 3COM). Kirti _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc =

1 0