January 2002 - USR-TC - mailman.xmission.com

V92 Update
by Thomas_Goodman＠3com.com 24 Jan '02

24 Jan '02

The v92 BETA as a full system suite will be out to the BETA group by End of Day today 12/21/01. That means that General Available code will be out in approximately 60 days. Feedback that we received was to release the full suite vs. partial suite to give full benefits to end users limiting confusion. The Full Suite of v92 will include: Modem on Hold PCM Upstream Modem Quick Connect and v.44 (replacing v.42bis) increasing to 6:1 compression PCM Upstream will increase users current upstream connection by 10-12Kb/sec. Some Vendors product may see reduction in download speeds to increase upload speeds. Total Control Hardware should not see a degradation on the download side with our dual processor design. This could differentiate your ISP from an ISP competitor if their Remote Access Gear either does not support PCM Upstream or if they share processing power and reduce download speeds. We will report back performance results on this as the BETA sites deploy and provide feedback. Equipment Requirements: HiPer DSPs or Multi-Spans HiPer NMC or 333MHz NMCs HiPer ARC 16/128 or new ARC The HiPer ARC with 16MB Flash and 128MB DRAM have been shipping since October 1998. There are still quite a few customer that will have 8MB Flash and 64MB DRAM in their Network if purchased prior to 1999. For those customers with 8MB Flash on their HiPer ARCs please contact me off list with Qtys, Serial Numbers and if they are used stand alone or as redundant. Happy Holidays, Tom Goodman

2 1

Was this list down??
by Timothy C. Bohen 24 Jan '02

24 Jan '02

Did I just miss a couple weeks or has this list been down?? Thanks Timothy C. Bohen CMSInter.Net / Crystal MicroSystems ============================ web : www.cmsinter.net email : Tim(a)CMSInter.Net phone : 989.235.5100 x222

3 3

testing
by Pete Ashdown 24 Jan '02

24 Jan '02

I received an email saying no list traffic had happened since December 17th, so I'm just sending out an email to see if its a list problem, or if traffic is just low.

1 0

FS: Hiper DSP cards set $1000each
by Stephen Rivera 23 Jan '02

23 Jan '02

Subject says it all. Steve Rivera 732-833-2111 x102 IM: srivera711 732-833-2115 fax for more product info got www.wrca.net Jackson, NJ 08527 (USA)

1 0

(usr-tc) Upgrading a TC
by Rob 19 Jan '02

19 Jan '02

What is the *least* expensive way to upgrade a TC v34 system to v90? Is there one? Feel free to write me offlist at mailto:rjb@worldnetoh.com. Thenks! Rob - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

NAT
by Kancha . 19 Jan '02

19 Jan '02

I've a TC1000 with HiperArc version 5.1.6. The TC has two E1 dsp cards. Currently I've public IP in the ip-pool. I want to give private ip to my dial-up users and do NAT. How can i achieve this in Total Control ?? kancha __________________________________________________ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/

1 0

WTB: USR Netserver 16 v34
by Stephen Rivera 18 Jan '02

18 Jan '02

Anybody sitting on these? Looking for a couple. Steve Rivera 732-833-2111 x102 IM: srivera711 732-833-2115 fax for more product info got www.wrca.net Jackson, NJ 08527 (USA)

1 0

test mail please ignore
by Kancha . 18 Jan '02

18 Jan '02

ignore the mail __________________________________________________ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/

1 0

FS: Some TC Gear
by Brian 16 Jan '02

16 Jan '02

I have a few peices of TC stuff for sale, if anyone would like to make a reasonable offer: 8 3Com Chassis 4 HiPer NMC 2 NMC 3 70A Supplies Brian ----------------------------------------------- Brian Feeny, CCIE #8036 e: signal(a)shreve.net Network Engineer p: 318.222.2638x109 ShreveNet Inc. f: 318.221.6612

1 0

48v DC power for TC 1000 chassis, power consumption
by Scott Trautman 14 Jan '02

14 Jan '02

Hi-- I'm looking at colo'ing at a telco facility, and they're wanting the equipment to be 48v DC, and wanting to know how much power in watts it consumes. The chassis I'm looking at is the one with the integrated fan tray, currently has dual 70a AC power supplies in 'em. Some guidelines by card would be really super....HIperARC, HiperDSP, NMC, fan/chassis itself power consumption ...if DC power supplies are ungodly expensive....(and I have every reason to believe they will be....) anyone had any experience with power inverters? DC 48 -> AC 110? Given I've got a couple other peices of equipment (Cisco) to put in that same way, and that aint going to be cheap either, maybe some kind of inverter would be the way to go....thoughts anyone? ...bonus if anyone could eyeball the wattage of a Cisco 3640 & Cisco 2924 switch! Thanks Much! SMT Scott M. Trautman Global Dialog Internet 2810 Crossroads, STE LL2 Madison WI 53718 http://www.gdinet.com <http://www.gdinet.com/>

1 0