July 2001 - USR-TC - mailman.xmission.com

(usr-tc) Multiple Messages
by Seth Jacobs 26 Jul '01

26 Jul '01

Guys, Sorry about the multiple messages. :( Seth ---------------------------------------------------------------- Seth Jacobs, OnRamp113, 707-678-0267 voice 805 N. Lincoln, Suite D, Dixon, CA 95620 www.onramp113.com

1 0

(usr-tc) Odd problem with AT&T calling card
by mmm3＠cornell.edu 26 Jul '01

26 Jul '01

A user is having a problem staying connected when she dials our pool using her AT&T Corporate Calling Card. She gets a connection, but is dropped after less than a minute. She is able to connect using a *personal* AT&T Calling Card. She is also able to make a voice call using the Corporate Card. Is it possible that corporate calls are routed differently, perhaps through noisy lines, than personal calls? I am at a loss on this one. She's calling from Minneapolis, MN, to Ithaca, NY. Thanks for any clues you can send my way! ********************************************************* Michelle M. Mogil Network and Computing Systems 735 Rhodes Hall, Cornell University, Ithaca, NY 14853 vox: (607) 255-0516, fax: (607) 255-8521 email: mmm3(a)cornell.edu ********************************************** - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) TC Chassis for Sale
by Seth Jacobs 26 Jul '01

26 Jul '01

Hello all, I've got a Used 3Com Total Control Chassis (Enterprise Network) Hiper Bundle for sale - First $4,500 takes The Bundle includes: (1) Chassis with integrated Fan Tray (1) 70A Power (1) Network Management Card (NMC) (1) Hiper Access Router Card (ARC) (2) Hiper DSP Cards Seth ---------------------------------------------------------------- Seth Jacobs, OnRamp113, 707-678-0267 voice 805 N. Lincoln, Suite D, Dixon, CA 95620 www.onramp113.com

1 0

(usr-tc) HiPer DSP - DNIS/DID alternate number access
by Andy 26 Jul '01

26 Jul '01

In a pickle here. Telco was sending me 4 digits that I was matching under DNIS Access Codes / DNIS Group, for the purpose of setting up modems on the fly on alternate access numbers. Now the telco is sending me mostly 10 digits (but sometimes 7), and my 4 digit pattern won't match. Unless I fall back to an undesirable telco service, they can't control the variable 7/10 digits. Putting 10 digits in my DNIS Group fields sounds obvious, except that I have more target numbers than Group fields (limit of 3). Really need suffix matching. I've been sifting extensively through the documentation, but have not found a regex type pattern match. Anyone have leads or answers on my dilemma? --- - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2

(usr-tc) FS: Hiper Everything, 70A and 130A power
by ISP-NetworkHardware.com 25 Jul '01

25 Jul '01

WRCA.Net, Your Source for Total Control Refurbished hardware, has the following available: Hiper DSP's $1600 (T1) Hiper DSP's $3000 (E1) Hiper ARC's $1200 Hiper NMC's $900 EdgeServer Pro's $1100 70A power sets $300, $250ea for pair 130A power sets $500, $400ea for pair Hiper Bundles 70A power $5500.00 Hiper Bundles 130A Power $6200.00 Quad Modems available...all models Netserver PRI's Dual PRI's NMC's NMC v90 enabled Fan Trays Chassis's - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Ascend-IP-Direct / Policy Routing
by Brian Becker 24 Jul '01

24 Jul '01

Ryan, The instructions from 3Com are shown below, but seem to be very unspecific in a few places. The vague part is the VPN side...here's a situation. Remote-POP-TC-Box Remote-POP-Cisco Local-Router Local-Content-Filter-R2000 Normal User gets IP Routes to Local To the world Filter User Gets IP and needs to be pushed to the tunnel IP/IP Tunnel From ------------------------------->Tunnel Terminated 10.10.10.1/255.255.255.252 10.10.10.2/255.255.255.252 So what would I need to do to get this user to be pushed thru the tunnel? The tunnel is uni-directional. Right now, we have a special pool of Ips for filtered customers and on the Cisco we policy route those Ips thru the tunnel. I would love to be able to avoid setting up a pool of Ips just for filtered users. This sounds like a possible solution but I need some more info. Thanks, Brian 3Com Info...................... Configuring Host-based IEA Routing Follow these steps: 1 . Add an IP network on an Ethernet interface through which the VPN gateway can be reached: add ip network <name> address <ip_address> interface <interface_name> For example, to add an IP network called Lancer with an IP address of 200.0.0.2 to the eth:1 LAN interface: add ip network lancer address 200.0.0.2 interface eth:1 2 . Set the routing protocol for this network: set ip network <name> routing_protocol [none | ripv1 | ripv2 | ospf] For example, to set the routing protocol to RIPv2: set ip network lancer routing_protocol ripv2 3 . Configure RIP to send routing information, but to not listen for updates. Since RIPv1 and RIPv2 are configured to send routing information by default, you only need to configure the listening action: set ip network lancer rip_policies_update no_ripv1_receive set ip network lancer rip_policies_update no_ripv2_receive 4 . Configure a user either locally or in the RADIUS server that specifies the next hop gateway. Local configuration - Create a network user. Also, use the following command specify a next hop gateway: set network user <username> ip next_hop_gateway <ip address> RADIUS configuration - Configure a framed PPP user, also defining the VPN-Neighbor (or IEA-Next-Hop-Router) attribute. (This is USR Vendor Specific attribute which has an ID of 0x9008.The value of this attribute is an IP Address.) attribute to specify the next hop gateway. 5 . Enable IEA next hop routing using this command: enable ip iea_next_hop_routing 6 . Optional. If you want to force the router card to use only the configured next hop routing interface (causing the user connection to be dropped if the gateway is unreachable), use this command: enable ip iea_force_nexthop_routing Brian Becker President, Poplar Bluff Internet, Inc. P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114 Home of http://semo.net - Southeast Missouri's Online Community http://TotallyFabricated.com Total Scrutinizer - Tech Support Just Got Easier WebGabber - All-html Web Chat Software -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com] On Behalf Of Ryan Tucker Sent: Monday, July 23, 2001 7:42 PM To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) Ascend-IP-Direct / Policy Routing Well, it turns out to be Ascend-Client-Gateway over here on our Max's... Ascend-IP-Direct didn't do it :-) But that's not your question... take a look at IEA-Next-Hop-Router. I think this will do what you need. -rt (standards -- so many to choose from) On Monday, July 23, 2001, at 01:47 , Carl Litt wrote: > > Does anyone know if the RADIUS attribute "Ascend-IP-Direct" is > supported by the HiPerARC? If so, what versions? Both Cisco and > Nortel CVX claim to support this VSA. > > From the definitions I've seen, Ascend-IP-Direct is used in an > Access-Accept > and tells the RAS to direct this user's packets to the provided gateway > IP. We would be using this to provide transparent content filtering > to select customers based on their RADIUS/LDAP entry. > > Otherwise, is there a way to do policy routing on the ARC via RADIUS? > I've looked at filters, but they don't seem to give the ability to > redirect, only accept or reject. (I am running ARC V4.2.32). > > Thanks, > Carl Litt > Network Administrator > Execulink Internet > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. For information > on digests or retrieving files and old messages send "help" to the > same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) FS: 3COM Hiper Access Bundle
by Brian Becker 24 Jul '01

24 Jul '01

We'll take it on our American Express Card Steve. Brian Becker President, Poplar Bluff Internet, Inc. P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114 Home of http://semo.net - Southeast Missouri's Online Community http://TotallyFabricated.com Total Scrutinizer - Tech Support Just Got Easier WebGabber - All-html Web Chat Software -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com] On Behalf Of Steveslists Sent: Monday, July 23, 2001 8:25 PM To: usr-tc(a)lists.xmission.com Subject: (usr-tc) FS: 3COM Hiper Access Bundle For Sale 1. USR Total Control Hiper Access Bundle, Complete Rack 70 Amp Power Supply Hiper ARC NMC 2 Hiper DSP Cards All Documentation and cables, In original packaging. $5,500 - Buyer pays shipping and insurance Unit is 18 Months old and recently removed from service. Seller has exited the ISP business. Please send responses to: forsale(a)tcmetro.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) MP/16 Firmware
by Josh Miller 24 Jul '01

24 Jul '01

Does anyone have or know where I can get the firmware for the MP/16 V.34 modems? The product number is 80-000939-00 or 80-001133-00 (w/SNMP). I have a few modems with corrupt firmware and need to reload it, but it is no longer available (at least that I can find) on either USR's or 3Com's sites. Thanks... - Josh - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2

(usr-tc) FS: 3COM Hiper Access Bundle
by Steveslists 24 Jul '01

24 Jul '01

For Sale 1. USR Total Control Hiper Access Bundle, Complete Rack 70 Amp Power Supply Hiper ARC NMC 2 Hiper DSP Cards All Documentation and cables, In original packaging. $5,500 - Buyer pays shipping and insurance Unit is 18 Months old and recently removed from service. Seller has exited the ISP business. Please send responses to: forsale(a)tcmetro.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Ascend-IP-Direct / Policy Routing
by Carl Litt 24 Jul '01

24 Jul '01

Does anyone know if the RADIUS attribute "Ascend-IP-Direct" is supported by the HiPerARC? If so, what versions? Both Cisco and Nortel CVX claim to support this VSA. >From the definitions I've seen, Ascend-IP-Direct is used in an Access-Accept and tells the RAS to direct this user's packets to the provided gateway IP. We would be using this to provide transparent content filtering to select customers based on their RADIUS/LDAP entry. Otherwise, is there a way to do policy routing on the ARC via RADIUS? I've looked at filters, but they don't seem to give the ability to redirect, only accept or reject. (I am running ARC V4.2.32). Thanks, Carl Litt Network Administrator Execulink Internet - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2