October 2001 - USR-TC - mailman.xmission.com

RE: (usr-tc) test - delete
by Brian Becker 26 Oct '01

26 Oct '01

Your T1 is working, but I'm not sure I heard the modem pick up. Try switching to B8ZS! -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com] On Behalf Of Blake Fithen Sent: Thursday, October 25, 2001 6:00 PM To: usr-tc(a)lists.xmission.com Subject: (usr-tc) test - delete test - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) FS: Total Control Hardware - WTB: Hiper NMC's! - Patton Available
by ISP-NetworkHardware.com 26 Oct '01

26 Oct '01

WRCA.Net has the following USR in stock, ready to ship. I know most of us are happy with USR/3Com but their a few ;) that have asked questions regarding Patton. WRCA.Net is now an authorized reseller of the Patton Products. I look forward to helping you with any questions you may have. PATTON HAS SEVERAL COMPETING MODELS, with some rare features like this... 2 YEAR FREE TECH SUPPORT FIRMAWARE UPGRADE, V92 STANDARD TRADE-IN PROMOTIONS $3500- $5000 FOR ANY COMPETITORS 48+PORT RAS FAIR MARKET VALUE FOR HARDWARE ON LEASE 2810 - 24 port $4500....2960 - 48 port $8500... 2996 - 96 port $14,000. Boxes can support T1, E1, CT1 as well as ISDN PRI line types. The units are complete with all software (pre-installed) and all hardware...including rack mount ears. Highlights: 1) Up to 96 Simultaneous connections on four T1/E1/PRI or Channelized T1 WAN lines. 2) 10/100 Full Duplex Ethernet port and RS232 Console Port 3) Built in SNMP/HTTP web management system 4) Supports Multilink-PPP and Multichassis for analog as well as ISDN calls. 5) Our dual and quad models are Convection Cooled -- Quiet 6) Dual redundant power supplies are standard and at no extra charge. 8) No worries with Patton's 30 Day "No Hassles" trial. 9) Financing information is available If you have any questions, or would like more detail on a specific model, please don't hesitate to contact me SRIVERA(a)WRCA.NET BACK TO THE SUBJECT AT HAND. Hiper DSP $1350 Hiper ARC $1200 64MB Hiper ARC $1600 128MB CellMux $700 Dual ADSL AxCell $700 130A power sets $600 70A power set $225 70A power sets (DC) - New In Box $350 45A Bundle, nmc, netserver pri, 12x quad digital modem, dual pri $850....This is a great box to consider for TRADE-IN for PATTON, They pay $5000 towards any of their RAS servers. 70a Bundle, nmc v90, netserver pri, 12x quad analog/digital modem, dual pri $1300 130A Bundle, nmc, hiper arc, 2x hiper dsp $5500 Netserver 8I $450 Netserver 16I $700 MP16 - Qty prices available. Managed MP16 $500 MP8 $350 MP8I $550 MP16I (International) $700 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) different IPs in start/stop accounting
by Charles Sprickman 22 Oct '01

22 Oct '01

Hello, Running HARC 4.2.32, I'm occasionally seeing sessions with the same session ID send one IP address in the START accounting message, and a different IP in the STOP accounting message. Has anyone else seen this? I'm trying to catch the box in the act so I can see which address the user is actually using, but so far no luck. I'm seeing this on multiple chassis, as well... Thanks, Charles | Charles Sprickman | Internet Channel | INCH System Administration Team | (212)243-5200 | spork(a)inch.com | access(a)inch.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) What memory does the HiperARC use?
by RickL＠solunet.com 16 Oct '01

16 Oct '01

Thanks for confirming Marshall. Sincerely, Rick -----Original Message----- From: Marshall Morgan [mailto:marshall@netdoor.com] Sent: Tuesday, October 16, 2001 2:34 PM To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) What memory does the HiperARC use? On Mon, 11 Jun 2001, Mike Greene wrote: > Well the results are in! The proper memory chip is shown below... > > 128MB EDO 168pin BUFFERED 3.3v > > Popped that bugger in and inserted the card and presto, 128MB on the card, > the ROM memory is NOT replaceable but I don't see that as being a major issue. > > As a reseller I paid $143.00 per chip, your mileage may vary... > > > - Mike > > ------------------------------------------------ > Rock Island Communications, Inc. (360)-378-5884 > http://www.rockisland.com/ San Juan Islands, WA > ------------------------------------------------ > > Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 ----- Original Message ----- From: <RickL(a)solunet.com> To: <usr-tc(a)lists.xmission.com> Sent: Tuesday, October 16, 2001 1:14 PM Subject: (usr-tc) What memory does the HiperARC use? > Hi, > Does anyone know the specs on HiperARC memory? > I know it is EDO, but: > Parity or Non-Parity ? > Gold Lead or Tin Lead ? > 5 volt ? > > Thanks, > Rick > > Rick Louizos > Solunet Soluserve TAC > Palm Bay, Fl. 32905 > Phone Numbers: > Phone: (888)449-5766 / Fax: (407)676-0809 > Internet Addresses: > mailto:RickL@solunet.com / http://www.solunet.com > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) What memory does the HiperARC use?
by RickL＠solunet.com 16 Oct '01

16 Oct '01

Hi, Does anyone know the specs on HiperARC memory? I know it is EDO, but: Parity or Non-Parity ? Gold Lead or Tin Lead ? 5 volt ? Thanks, Rick Rick Louizos Solunet Soluserve TAC Palm Bay, Fl. 32905 Phone Numbers: Phone: (888)449-5766 / Fax: (407)676-0809 Internet Addresses: mailto:RickL@solunet.com / http://www.solunet.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) What memory does the HiperARC use?
by RickL＠solunet.com 16 Oct '01

16 Oct '01

Thanks Mike. That helps. Rick -----Original Message----- From: Mike Greene [mailto:mikeg@rockisland.com] Sent: Tuesday, October 16, 2001 2:31 PM To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) What memory does the HiperARC use? At 02:14 PM 10/16/01 -0400, you wrote: >Hi, >Does anyone know the specs on HiperARC memory? >I know it is EDO, but: >Parity or Non-Parity ? >Gold Lead or Tin Lead ? >5 volt ? 128MB EDO 168pin BUFFERED 3.3v Mine was tin lead, don't remember about parity though. - Mike ------------------------------------------------ Rock Island Communications, Inc. (360)-378-5884 http://www.rockisland.com/ San Juan Islands, WA ------------------------------------------------ - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) MRTG stats
by Mark Thornton 16 Oct '01

16 Oct '01

I have been using the hiperdsp.pl scripts included with the MRTG distibutions to track modem usage and it has always worked well until yesterday. About 10 p.m. the available modems value has dropped from 153 to 1. I have performed a software reset on the hipernmc and it did not fix the problem (it used to fix loss of communication on the old nmcs). Any ideas, or is there a better way to monitor modem utilization? Thanks, Mark Thornton San Marcos Internet, Inc 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 4

(usr-tc) Converting T1/PRI card to CT1
by Brad Gass 13 Oct '01

13 Oct '01

Hello, all. Does anyone have CT1 (and possibly PRI as well) firmware available for the 386 version of the T1 cardset? I currently use a 186 powered CT1 card and am experiencing some general oddness with DS0->modem crossconnects being lost across power cycling the chassis, and want to try my spare 386 powered T1 card to see if it solves some of the strangeness I'm seeing. I'm down to that card as the last possible of the source of the problem I believe. My spare is loaded with PRI code, and I don't have PRI's available yet unfortunately, or I could use the spare as-is with some reprovisioning. The need for the PRI code as well is only preliminary now, but I'm told I should have PRI capability available soon in that CO, and would convert if I needed/wanted to service ISDN connections. I assume from reading the archives that there is no way of extracting the firmware from the card as it is now (PRI) so I can reload it if I do want to convert to PRI? Well, without the use of a soldering iron and a few hours at the bench anyway! I wonder why USR/3Com didn't just expand the size of the Flash (if they even needed to), and create firmware that could be used in both scenarios? As always, any and all help/suggestions is greatly appreciated! Brad - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Hiper DSP's $1200
by ISP-NetworkHardware.com 12 Oct '01

12 Oct '01

Subject says it all :) First come, First Served. Amex, Visa, Mastercard, COD 30 day warranty - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) NMC Upgrade Special for ISPCON
by Thomas_Goodman＠3com.com 12 Oct '01

12 Oct '01

For those that have a need to only upgrade their NMC card be v.92 ready. We are able to build out a limited number of HiPer NMC cards and add a HiPer DSP card to get the pricing down. New! Management Card Upgrade Pack Rebate Program Now service providers have the opportunity to trade in their existing network management card (NMC) and trade-up to V.92 hardware ready technology. V.92 technology gives them a powerful access solution designed to generate new revenue. Service providers simply purchase the qualifying Total Control 1000 V.92 Hardware Upgrade Pack which includes a Total Control 1000 (HiPer) DSP Card Set and Total Control 1000 P5 (HiPer) Network Management Card Set and trade in their existing network management cards to receive a rebate back from 3Com. Eligible Participants Internet service providers (ISPs) and competitive local exchange carriers (CLECs) (ISPs and CLECs are hereinafter collectively referred to as "service providers") in Canada and the U.S. are eligible to participate in the Total Control 1000 V.92 Hardware Upgrade Pack Rebate Program. Claims by resellers or any other party that resells product will not be honored. How the Upgrade Pack Rebate Program Works To be eligible for the Management Card Upgrade Pack Rebate, a service provider must purchase the Total Control 1000 V.92 Upgrade Pack between October 1, 2001 and November 30, 2001 from any authorized CommWorks reseller and obtain an invoice and proof of payment (cancelled check). Claims by resellers or any other party that resells product will not be honored. 3Com must receive program claim forms no later than December 28, 2001. The trade up rebate is available only after the purchase of the following: Eligible Product:SKU Purchased Product Description Rebate Per NMC List Price 3C0505297-00 Total Control 1000 V.92 Hardware Upgrade Pack* $500 (USD) $7,500 * Management Card Upgrade Pack IncludesQuantity SKU Description 1 002092-01 Total Control 1000 (HiPer) DSP Card Set 1 003440-00 Total Control 1000 P5 (HiPer) Network Management Card Set Do the math: A Double Play is $12,000 List and includes two (2) 002092-01 so in theory $6,000 each that puts the NMC card at $1,500 in this promo vs. a $4,995 list and there is a $500 rebate. So net $1,000 NMC before discounts. For details and rules: http://www.commworks.com/Programs/Promotional_Offers/ http://www.commworks.com/Programs/Promotional_Offers/TC1000_v.92_upgradepac… - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2