July 2000 - USR-TC - mailman.xmission.com

(usr-tc) Netgear woes
by Scot Desort 10 Jul '00

10 Jul '00

Anyone else have trouble with Netgear external ISDN TA's? I have a customer who, most of the time, can't even get a single B channel to setup, let alone authenticate. Got them on the latest firmware. Nothing. -- Scot - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

11 17

(usr-tc) L2TP with Tunnel-Password
by Donald Baud 08 Jul '00

08 Jul '00

I am trying to use the Radius Tunnel-Password attribute in order to control the usage of the L2TP tunnels open by the HARC. I managed to set up a tunnel with two HARC's 5.0.9 acting as LAC and LNS. But I can't seem to enable the Tunnel-Password feature. Here is my setup: On the LAC side: The Radius Server authenticates the users with: Framed-Protocol = PPP Tunnel-Server-Endpoint = 192.168.100.10 Tunnel-Type = L2TP On the LNS (192.168.100.10) side: The call arrives and is authenticated as a PPP call. Now if I want to use a Tunnel secret, I made sure both LAC/LNS have the same "System Transmit authentication name": set system transmit_authentication_name HiPer I add a Tunnel-Password = MyPassword to the Radius profile on the LAC, and set up an extra account on the LNS called HiPer with: add user HiPer set tunnel user HiPer password MyPassword type L2TP security None Syslog reports the following: The LNS first complains: Unauthenticated message from HiPer The LAC then sends: Could not contact 192.168.100.10 The protocol monitor shows the Call being setup from the LAC and the LNS responding with a call disconnect immediately. Has anyone been able to set up HARC as an LNS with Tunnel-Password ? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) HiperArc semi-locking
by Mike Wilker 08 Jul '00

08 Jul '00

I've had several cases on 3 of my chassis over the past week or so just randomly locking. Symptoms range from users being able to connect but not go anywhere to users being unable to connect at all. In all cases either a telnet or dialing into the TC and logging in as administrator results in an immediate disconnect. The only way I can get things back to normal is to do a hardware reset on the card through TCM. I'm running 4.2.32 on all the HiperArcs, and have been for months before this started. Does anyone have any idea what could be causing this? Thanks. Mike Wilker Director of Network Operations Local Link USA & Protocol Communications

3 2

(usr-tc) v.92
by Stainforth, Matthew 06 Jul '00

06 Jul '00

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I was just reading this and wondered if the rest of you had seen it. http://www.itu.int/newsroom/press/releases/2000/14.html Matthew Stainforth || Technical Services Manager || BrunNet Inc. -----BEGIN PGP SIGNATURE----- Version: PGP 6.5.3 iQA/AwUBOWMoW4/1mwWeaTsYEQIr4wCgrqL9exdlX/vmqbXiVEs+knDCJjMAoNnX pC/b7A7LT3SoO/cKuVdi9VYj =o0G8 -----END PGP SIGNATURE----- - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

Re: (usr-tc) USB ISDN Terminal Adapters?
by Tim Huffman 05 Jul '00

05 Jul '00

Yes, I know that a serial card would be another solution, however it doesn't meet our needs. We need something that is very easy for an end-user to install! -Tim _______________________________________________________________ Tim Huffman--------------JORSM Internet, Regional Internet Services Sr. Technical Support----7 Area Codes in Chicagoland and NW Indiana timh(a)jorsm.com-----------100 Mbps+ Connectivity, 56K-DS3, V.90, ISDN (219)322-2180------------Quality Service, Affordable Prices http://www.jorsm.com-----Serving Gov, Biz, Indivds Since 1995 ________________________________________________________________ Â On 7/3/00 6:39:54 PM, "Scot Desort" wrote: >Might want to also consider the Turbocom Serial card from Pacific Dataware. >Their serial card is 921Kbps - plenty fast to handle ANY ISDN t/a. > >-- >Scot > > > >----- Original Message ----- >From: Tim Huffman <timh(a)jorsm.com> >To: <usr-tc(a)lists.xmission.com> >Sent: Monday, July 03, 2000 10:17 AM >Subject: (usr-tc) USB ISDN Terminal Adapters? > > >> Hi, as a solution for one of our clients, we are considering using a USB >ISDN Terminal >> adapter, since the bus speed on serial cards does not allow full 128K >throughput. Does >> anybody know of a good USB ISDN Terminal Adapter? How stable are they, and >do >> they play nice with the Total Control stuff? >> >> -Tim >> >> _______________________________________________________________ >> Tim Huffman--------------JORSM Internet, Regional Internet Services >> Sr. Technical Support----7 Area Codes in Chicagoland and NW Indiana >> timh(a)jorsm.com-----------100 Mbps+ Connectivity, 56K-DS3, V.90, ISDN >> (219)322-2180------------Quality Service, Affordable Prices >> http://www.jorsm.com-----Serving Gov, Biz, Indivds Since 1995 >> ________________________________________________________________ >> >> >> >> >> - >> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> with "unsubscribe usr-tc" in the body of the message. >> For information on digests or retrieving files and old messages send >> "help" to the same address. Do not use quotes in your message. >> > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) USB ISDN Terminal Adapters?
by Tim Huffman 04 Jul '00

04 Jul '00

Hi, as a solution for one of our clients, we are considering using a USB ISDN Terminal adapter, since the bus speed on serial cards does not allow full 128K throughput. Does anybody know of a good USB ISDN Terminal Adapter? How stable are they, and do they play nice with the Total Control stuff? -Tim _______________________________________________________________ Tim Huffman--------------JORSM Internet, Regional Internet Services Sr. Technical Support----7 Area Codes in Chicagoland and NW Indiana timh(a)jorsm.com-----------100 Mbps+ Connectivity, 56K-DS3, V.90, ISDN (219)322-2180------------Quality Service, Affordable Prices http://www.jorsm.com-----Serving Gov, Biz, Indivds Since 1995 ________________________________________________________________ Â - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) Selling all our Total Controls
by Greg Long 03 Jul '00

03 Jul '00

Sounds great! What's your email address? Thanks, Greg Long Network Administrator Coastlink 801-532-6212 ext 32 greg(a)coastlink.com http://www.coastlink.com > -----Original Message----- > From: owner-usr-tc(a)lists.xmission.com > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Denis Newkirk > Sent: Saturday, July 01, 2000 6:58 AM > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) Selling all our Total Controls > > > We'll be selling all of our total control chassis and modems > at the end of > August. I haven't been keeping track of the value of these > things, but > here's a brief list. > > 5 Chassis > 16 Hiper DSP > > of course the NMC comes with the chassis and I can sell pieces. > > Anyone interested in reserving these units for purchase once they are > replaced, please email me off list. > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Selling all our Total Controls
by Denis Newkirk 01 Jul '00

01 Jul '00

We'll be selling all of our total control chassis and modems at the end of August. I haven't been keeping track of the value of these things, but here's a brief list. 5 Chassis 16 Hiper DSP of course the NMC comes with the chassis and I can sell pieces. Anyone interested in reserving these units for purchase once they are replaced, please email me off list. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Problem
by Valantine Nchemty Nyenty 01 Jul '00

01 Jul '00

Hi all We have noticed that the Ip address of the TC is propagated to Windows 98 PCs on our network as a default gateway . This sometimes prevents some of our customers from connecting to the Internet. When we perform a ping to any computer in the internet, it says : response from the TC IP address , destination unreachable. What can I do to solve this problem? Thanks in advance Valantine Nchemty Nyenty - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1