February 2000 - USR-TC - mailman.xmission.com

(usr-tc) TRANSMISSION PROBLEMS
by jeff.binkley＠asacomp.com 12 Feb '00

12 Feb '00

We have a user who has been having problems with their dialup connection from the day they started with us. They are complaining about the typical "stalling problem" and their application (a stock tracking application) dying which is causing them to have to do a reboot on Win95. To make matters worse they have a Lucent Winmodem. I have sent them the latest software but it doesn't seem to help. They are getting a solid 28.8kbs connection. I looked at theor modem stats in TCM, when they were connected, and the analog stats look fine. However, when I look at Call Stats I am seeing some strange numbers: Number of characters sent 2664304 Numebr of charcters received 398400 Number of blocks sent 37255 Number of blocks received 19320 Numebr of retrains requested 0 Number of characters lost 0 Link block errors 1160 Number of link protocol timeouts 265 Number of NAKS sent 1919 Gain recalculation count 0 Do these numbers seem normal ? I checked other calls and the results of my observations are unconclusive. I am open to suggestions. Of course with their other ISP (where they lived previously) they didn't have this problem. Jeff Binkley ASA Network Computing - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

8 10

RE: (usr-tc) RIP problem after renumbering
by Stainforth, Matthew 12 Feb '00

12 Feb '00

It's the combined mojo of Jeff McAdams, Mike Andrews, Krish, and Mike Wronski mostly. Matthew Stainforth || Technical Services Manager || BrunNet Inc. > -----Original Message----- > From: Mark Thornton [mailto:mark@corridor.net] > Sent: Friday, February 11, 2000 3:06 PM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) RIP problem after renumbering > > > God, I love this list. The mere threat of asking my question > on the list > forced the Cisco to wake up and start participating in the > rip sessions > after 3 hours of waiting. Your karma must be powerful. > > Mark Thornton > San Marcos Internet, Inc. > 512-393-5300 > > > ----- Original Message ----- > From: Mark Thornton <mark(a)corridor.net> > To: <usr-tc(a)lists.xmission.com> > Sent: Friday, February 11, 2000 12:30 PM > Subject: (usr-tc) RIP problem after renumbering > > > > We are moving to a new ip address block and this is causing > problems with > my > > cisco router. Specifically, when I specify "network > 63.90.208.0" in the > > router rip configuration it creates the entry as "network > 63.0.0.0" and > does > > not pick up any of the rip routes from the chassis's I have > moved. The > > chassis's themselves see the rip routes from the other > chassis's in the > same > > class C, but not the those in the old class C block. > > > > I'm sure I'm doing something wrong, but it eludes me at the > moment. Can > > anyone help? > > > > Mark Thornton > > San Marcos Internet, Inc. > > 512-393-5300 > > > > > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old > messages send > > "help" to the same address. Do not use quotes in your message. > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) blinking red wan rx led on Netserver PRI card
by Chris Hanes 11 Feb '00

11 Feb '00

Does anyone know what this indicates? I'm getting calls on the box and the red comes and goes. Thanks, Chris Hanes - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Hiper 4.2.32 problem
by Jorge Lozano 11 Feb '00

11 Feb '00

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have TCS 3.6 with ARC 4.2.32 and DSP 2.0.19... the ARC was a card with 4.1.72 firmware, but I upgrade to it to 4.2.32... all work fine... but when I connect... in a short time.. 1 minute or 2... the call is dropped. can anybody help me? thanks for your assistance,, /Jorge Lozano -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.2 for non-commercial use <http://www.pgp.com> iQA/AwUBOKQJ16p3oywyFVUlEQKmNwCdEHtA74BZvB9TQvixehTOyPv6ns8AnAsL rwlzZfsJ0EQiC0zRCMx/tQdX =/dZ/ -----END PGP SIGNATURE-----

1 0

(usr-tc) "dictionary": where to get the most recent?
by Dave Kitabjian 11 Feb '00

11 Feb '00

I'm a newbie to USR-TC, so please pardon me if this is a FAQ... I'm working on integrating a new Radius server with our Total Control chasses. Where can I get the most recent (ie, complete and up to date) Radius "dictionary" file for these chasses? I've searched the "Documentation Library" CD and, to some extent, the web site, but haven't found anything. I'd be grateful if someone could point me in the right direction. Thanks! Dave :) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

Re: (usr-tc) FS: 1-Hiper DSP w/ NIC
by Steve Rivera 10 Feb '00

10 Feb '00

sorry about that...Prices were just posted. At 12:59 PM 02/10/2000 -0600, you wrote: >On Thu, 10 Feb 2000, Mark E. Levy wrote: > > > Um, look 7 lines up from your reply... > >where you will find a price for a DSP, but not prices for the other 3 >pieces of equipment he is selling............. > > > > > > eric(a)dol.net wrote: > > > > > > At 12:43 PM 2/10/00 -0500, you wrote: > > > >Many of you have contacted me for DSP hardware > > > >I have this available now. > > > > > > > >Unused Condition w/ CD-ROM and Docs. > > > >1- USR Hiper DSP Modem Card w/ nic $3400 > > > > > > > >These are refurbished, deinstalled a week ago. > > > >2- Hiper ARC w/ nics > > > > > > > >1- Hiper NMC (New) > > > > > > Can I have prices on these? > > > thanks > > > eric > > > > > > - > > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > > with "unsubscribe usr-tc" in the body of the message. > > > For information on digests or retrieving files and old messages send > > > "help" to the same address. Do not use quotes in your message. > > > > -- > > --------------------------------------------------------------------- > > Mark E. Levy, President > > FSINet, Inc. > > 800-827-6085 x202 > > 847-753-6832 fax > > www.fsi.net > > mark(a)fsi.net > > --------------------------------------------------------------------- > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > >----------------------------------------------------- >Brian Feeny (BF304) signal(a)shreve.net >318-222-2638 x 109 http://www.shreve.net/~signal >Network Administrator ShreveNet Inc. (ASN 11881) > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) FS: 1-Hiper DSP w/ NIC
by eric＠dol.net 10 Feb '00

10 Feb '00

At 12:43 PM 2/10/00 -0500, you wrote: >Many of you have contacted me for DSP hardware >I have this available now. > >Unused Condition w/ CD-ROM and Docs. >1- USR Hiper DSP Modem Card w/ nic $3400 > >These are refurbished, deinstalled a week ago. >2- Hiper ARC w/ nics > >1- Hiper NMC (New) Can I have prices on these? thanks eric - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) FS: 1-Hiper DSP w/ NIC
by Steve Rivera 10 Feb '00

10 Feb '00

Many of you have contacted me for DSP hardware I have this available now. Unused Condition w/ CD-ROM and Docs. 1- USR Hiper DSP Modem Card w/ nic $3400 These are refurbished, deinstalled a week ago. 2- Hiper ARC w/ nics 1- Hiper NMC (New) .................................................... WR Communication Associates Worldwide Provider of Network Hardware Since 1981. I'm always available for your call...732-433-5890 Steve Rivera - sales(a)wrca.net v-732-833-2111 Office http://www.ISP-NetworkHardware.com or http://www.wrca.net ---ACCESS/TRANSMISSION SPECIALIST--- Cisco, Ascend, Livingston, USR, Microcom, Computone, Kentrox, Adtran...and more - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Webramp issues?
by Scott Trautman 10 Feb '00

10 Feb '00

Hi, We've got a customer with a Webramp analog "router", that has had really inconsistent connection problems. They can connect, but get no connection activity, and lots of Lost Carriers. Yep, I looked up in 3Com's knowledgebase, and suggested 2 things, disable ccpp (I think)-which I did, and also suggested disable PPP offloading. We use ARC's with the 2.59.6 code and DSP's with the 2.0.60 code. Seemed to have had a little better luck connecting with 2.0.60 DSP's, but is still having major problems. Seems like 1 out of every 4 connections stays up. I'm not inclined to disable PPP offloading; we have 5 DSP's in that chassis, and I'm concerned that I'll drag EVERYONE's performance down. Any other solutions? I'm about ready to take a Netopia dual analog box out there to replace it. Webramp has been of no help and doesn't seem to think there's any kind of problem with their equipment. Is this more a DSP problem or an ARC problem? Would switching to the latest ARC code (we don't use OSPF yet with ARC's so no problem), or ? I'd rather (of course) not create new problems if I'm only going to solve one fellow's problem! Thanks! SMT Scott Trautman, President, Global Dialog Internet scott(a)gdinet.com <mailto:scott@gdinet.com> http://www.gdinet.com <http://www.gdinet.com/> 2810 Crossroads, Suite LL2, Madison WI 53718 608-240-4638/4637fax - Internet Service Provider

1 0

(usr-tc) Quicken online payment process not working with TC
by Colin Wantling 10 Feb '00

10 Feb '00

Tom, does the problem go away if you set the framed MTU size to 1500 on Radius (or set MTU to 1500 on HiperArc if no Radius)? Colin Wantling Enertel, Zwolle Netherlands I am a new migrator to TC's from PM3's. I still have 4 of the PM3's. I use Quicken from home to balance my checking account and to do online payments, and I found out this morning that if I am connected thru a PM3, it connects to the host server just fine, but if I'm connected to my TC, then it just times out and will not connect. Has anyone ever seen this or could tell me what ports this might be running on? Tom Swenson NetConX - Internet Access - Web Design - Client Managed Web Database Applications tom(a)netconx.net http://www.netconx.net (515) 421-4170 - Voice (515) 423-3351 - FAX - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1