February 2000 - USR-TC - mailman.xmission.com

Re: (usr-tc) Radius and VPN-Neighbor
by G. Douglas Davidson 04 Feb '00

04 Feb '00

On Feb 3, 2:06pm, G. Douglas Davidson wrote: > Subject: Re: (usr-tc) Radius and VPN-Neighbor > On Feb 3, 12:28pm, Brian wrote: > > Subject: Re: (usr-tc) Radius and VPN-Neighbor > > > > What attribute id are you using. I have used: > > > > VENDORATTR 429 USR-VPN-Neighbor 36872 ipaddr > > > > successfully. It has to be one hop away to work however. > > > > I have tried both of these attribute formats: > > ATTRIBUTE USR-PW_VPN_Neighbor 0x9008 ipaddr > ATTRIBUTE USR-PW_VPN_Neighbor 36872 ipaddr > I believe that I have the attribute successfully transmitted to the TC. The format that worked for me was: ATTRIBUTE USR-PW-VPN-Neighbor 36872 ipaddr USR with the Radius users file set: USR-PW-VPN-Neighbor = 198.144.34.46, I end up with: INFORMATION FOR SESSION me Service Type: Framed Framed Protocol: PPP Speed of Connection: Auto Login Service: Telnet Interface Name: slot:9/mod:4 IEA Next Hop Gateway IP Address: 198.144.34.46 Active Session ID: 2031616 Framed IP Netmask: 0.0.0.0 Framed Routing: None Framed Callback Identifier: 0 Framed MTU: 1441 Compression Algorithm: None Compression Reset Mode: Auto Receive Acc Map: 0 Transmit Acc Map: 0 I neglected to increment a length field in the section of Radius that returns attributes to the client, and so I stomped on a few things. BUT, it still is not working. I can ping the Next Hop Gateway. It is on the same subnet at the ethernet IP on the TC. Some other settings: IEA Radius Source Port Authentication ENABLED IEA User Radius supplied username DISABLED IP RIP ENABLED IP Number RIP Interfaces: 1 IP Number RIP Neighbors: 0 IP RIP Flags: METRICS SEND_REQUEST IEA Next Hop Routing: ENABLED IEA Send Unsolicited Proxy Arp: DISABLED IEA Force Next Hop Route: DISABLED Any thought would be appreciated. -- ----- G Douglas Davidson | CityNet, Inc. douglas(a)city-net.com | Pittsburgh, PA voice: 412.481.5406 | fax: 412.431.1315 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) Looking for 3 Hiper DSPs
by David DenHollander 04 Feb '00

04 Feb '00

Phillip, Brand new Hiper DSP's $3750 each (24 ports) At 10:56 PM 2/3/00 -0500, you wrote: > > With all the talk of those switching to PMs from the total control >hubs, I would be interested in hearing from anyone that would like to SELL >components... In particular, we need 3 Hiper DSPs and (1) 70 Amp power >supply. Would consider buying a chassis if the price is right! > > Please reply via private email! > > BTW... We have resolved most of our connectivity problems by making sure >our member have the latest software updates for their systems (ie. >Softpaks, etc) Also, exclusively use http://808hi.com for drive/flash >updates! We have a wide range of modem types used with our TC HUBS and >have about a 99% success rate of getting our members running at v.90 >speeds! Just my .02 worth! We do not have any support contracts either, >but the help and guidance from this list is invaluable! > >=========================================================================== === >Phillip Ferraro WorldNet Access, Inc >pferraro(a)wna-linknet.com Onslow County's PREMIER InterNet Service >Voice (910) 346-0835 824 Gumbranch Square, Suite R3 >FAX (910) 455-1933 Jacksonville, Nc 28540-6269 >=========================================================================== === > > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > David DenHollander Adoptable Equipment Corporation Suite 210, 259 Midpark Way SE Calgary, Alberta Canada T2X 1M2 "Check out our inventory and list your equipment for free" http://www.adoptable.com/ (403)254-1100 Phone (403)201-2815 Fax - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Thoughts on support contracts...
by Mark Thornton 04 Feb '00

04 Feb '00

I had a thought cross my mind last night (it does happen occasionally) that I want to bounce off the list. First let me say that in the short time I have been on this list I have learned a great deal about configuration issues that have plagued me for some time. I wouldn't drop this list no matter what. The thought revolved around the support list for one of my software vendors. As a paid support client I have access to the list(s) which include active participation of the tech support department. Many problems are solved on the list in full view of others so the knowledge of solutions is quickly spread through the user group. The list also becomes a quick way to validate bugs and distribute solutions. In the case of my vendor they typically respond to bugs within hours so it is very effective. We all know that our money is going to further the product and we are participants in the process. I have another software vendor that maintains a mail list but it is not officially monitored by the technical support group. We are supposed to kinda flounder around and figure things out, then if we get really desperate we can call tech support. The problem is that all the solutions are locked up in thier database, not publicly available to the users to minimize future requests for the same information. I haven't yet convinced them that it is to their advantage to make as much information available as possible. It will reduce their tech support load considerably, allowing them to focus on real problems. Then I realized that 3Com has the same issue. I suspect that if 3Com dedicated a tech to a mailing list to address issues for the smaller clients like us, meaning fewer than a thousand TCH systems per pop, it would go a long way to resolving many of the relationship problems we are experiencing. The techs we do have appearing on this list are obviously doing this in between other tasks. I'm sure we appreciate the time they can provide, though I'm sure they have to steer clear of most of the politically charged stuff. Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) FS: 2 NMC (16MB) cards
by Brian 04 Feb '00

04 Feb '00

We have 2 16MB (non Hiper) NMC cards for sale. $300 each OBO. Brian ----------------------------------------------------- Brian Feeny (BF304) signal(a)shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) (USR-TC) LOOKING FOR 3 HI
by jeff.binkley＠asacomp.com 04 Feb '00

04 Feb '00

U> With all the talk of those switching to PMs from the total control U>hubs, I would be interested in hearing from anyone that would like to U>SELL components... In particular, we need 3 Hiper DSPs and (1) 70 Amp U>power supply. Would consider buying a chassis if the price is right! U> Please reply via private email! U> BTW... We have resolved most of our connectivity problems by making U>sure our member have the latest software updates for their systems U>(ie. Softpaks, etc) Also, exclusively use http://808hi.com for U>drive/flash updates! We have a wide range of modem types used with U>our TC HUBS and have about a 99% success rate of getting our members U>running at v.90 speeds! Just my .02 worth! We do not have any U>support contracts either, but the help and guidance from this list is U>invaluable! Phillip, I agree except I have seen recently 2 cases where we did doanload the latest software and with a Rockwell based modem the best our client could get is 26.4K with the cause being high frequency roloff. We sent them a 3Com winmodem and they got 37.33K and 40.66K just by changing the modem out. Jeff CMPQwk 1.42 9999 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Problem with new PRI
by Scot Desort 04 Feb '00

04 Feb '00

We added another PRI to our hunt group today. Telco says all trunks in group are set to UCD hunt method. New PRI is only taking 1 call on channel 1. It has taken both analog and digital calls on that channel. I have checked the card in TCM and all channels are enabled. I have done a hardware reset on the card, with no effect. Have not had the opporunity to switch the PRI to see if the problem follows the card or the trunk. Any ideas on what I might be missing? -- Scot - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 8

(usr-tc) Annoying log message from usrtc
by Dan Borlovan 04 Feb '00

04 Feb '00

Hello, I get a bunch of messages like this logged via syslog from our usrtc: Feb 4 15:20:29 tc1 --syslog capture: c66a0000 slot:12/mod:3 --syslog capture:stop Any idea what they mean and how to stop them? This is the tc configuration (syslog ip address replaced by xxx.xxx.xxx.xxx): hiper arc> list sysLOGS SYSLOG SINKS SysLog Log Level Msg Count Facility Allow all Auth levels xxx.xxx.xxx.xxx CRITICAL 282415 LOG_AUTH YES hiper arc> list faCILITIES FACILITIES Event Facility Log Level ATM AAL Driver CRITICAL ATM ILMI CRITICAL ATM Network Driver CRITICAL ATM SAR CRITICAL ATM Signalling CRITICAL Auth Facility CRITICAL Board Support Management ProcessCRITICAL CMTS SNMP Manager CRITICAL Call Initiation Process CRITICAL Command Line Interpreter CRITICAL Configuration File Manager CRITICAL Configurator CRITICAL Console Driver CRITICAL DHCP relay agent CRITICAL DNS CRITICAL Discovery CRITICAL Driver CRITICAL Ethernet Driver CRITICAL Event Handler CRITICAL Filter Manager Process CRITICAL Frame Relay Process CRITICAL GWC Modem Driver CRITICAL GWCWAN Driver CRITICAL IP CRITICAL IP Routing Process CRITICAL IP Spoofing Process CRITICAL IPX CRITICAL IPX Spoofing Process CRITICAL IPX/IP Dial-out Process CRITICAL L2TP CRITICAL MCNS Reg/Adm CRITICAL MIB Registrar CRITICAL MPIP CRITICAL NTP - Network Time Protocol CRITICAL Network Management Bus Agent CRITICAL Network Management Bus Driver CRITICAL Network Management Interface CRITICAL Non-Existant facility 82 CRITICAL Non-Existant facility 83 CRITICAL OSPF Facility CRITICAL PPP CRITICAL PPTP CRITICAL Polling Process CRITICAL Port Tapper CRITICAL QAM Driver CRITICAL Remote Ping Process CRITICAL RoboExec CRITICAL SBUS CRITICAL SLIP Process CRITICAL SNMP CRITICAL TCP CRITICAL TFTP Client CRITICAL TFTP Process CRITICAL Telnet CRITICAL Text Editor CRITICAL Traceroute CRITICAL Tunnel Dispatcher CRITICAL UDP CRITICAL UMC driver CRITICAL User Manager CRITICAL VTP CRITICAL Dan -- Dan Borlovan <danb(a)dnttm.ro> System Administrator, Network Operation Center Dynamic Network Technologies - Timisoara, Romania Telefon: +40-56-204967 FAX: +40-56-220201 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Looking for 3 Hiper DSPs
by pferraro＠wna-linknet.com 04 Feb '00

04 Feb '00

With all the talk of those switching to PMs from the total control hubs, I would be interested in hearing from anyone that would like to SELL components... In particular, we need 3 Hiper DSPs and (1) 70 Amp power supply. Would consider buying a chassis if the price is right! Please reply via private email! BTW... We have resolved most of our connectivity problems by making sure our member have the latest software updates for their systems (ie. Softpaks, etc) Also, exclusively use http://808hi.com for drive/flash updates! We have a wide range of modem types used with our TC HUBS and have about a 99% success rate of getting our members running at v.90 speeds! Just my .02 worth! We do not have any support contracts either, but the help and guidance from this list is invaluable! ============================================================================== Phillip Ferraro WorldNet Access, Inc pferraro(a)wna-linknet.com Onslow County's PREMIER InterNet Service Voice (910) 346-0835 824 Gumbranch Square, Suite R3 FAX (910) 455-1933 Jacksonville, Nc 28540-6269 ============================================================================== - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

Re: (usr-tc) Netserver 3.7.24 and RIP
by eric＠dol.net 04 Feb '00

04 Feb '00

>on the Cisco: > >router rip > version 2 > timers basic 30 30 2 60 300 > network x.x.x.x # network your tc/cisco is on > no auto-summary > >router rip > version 2 > timers basic 30 30 2 60 300 > network 208.206.76.0 > no auto-summary > Shoul you have multiple network statements for multiple class c s? This info was just was I was looking for for routing a small subnet to one of muy customers who may be on any one of 5 tc/boxes. thanks eric - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

Re: (usr-tc) YYYeeeoooowwwww!!!
by Clayton Zekelman 04 Feb '00

04 Feb '00

We've had Quads, HiperDSP and PM3's. We've always maintained 2 separate pools. When someone couldn't conect to the Quads, we would give them the PM3 number. Solved alot of problems for people with incompatible modems. We went through ALOT of pain when we swapped our Quads out for DSP's, but hopefully, things are settling down. It seems now that the connection issues that are left are common to both platforms in many cases (DSP & PM3). I guess you can't win. Since we went to 3.8.2c4 on the PM3's, I think the overall performance has been better. We're trying 2.0.51 on our DSP's this weekend.... At 03:51 PM 2/3/00 -0500, you wrote: >On Thu, 3 Feb 2000, John Lange wrote: > >> You people whine about your TC's JUST AS MUCH as we whine about our >> PM3's. Looks like modem compatibility is just as bad as the PM3's >PM3 is crap compared to Quads. I don't have any DSP (and since code seems >less stable..). > >> Lucent's tech support is Free but sometimes difficult to get a human voice. >Just the 800 number then the ticket number gets you right to the very same >tech you talked to a couple of minutes ago.. > >> TC's are $2k cheaper with the service contract than PM3's >Not in Canada, as far as I know. > >> PM's OSPF works??? (At this point I don't need it) >Yes, and a big bit better than TC rip on Netserver. > >> TC's chasis are upgradeable, with different cards >What about power requirements? Hiper Chassis is filled with fans and >require incredible amps, whereas PM3 is less noisy than a PC. > >> Anyone have any other comparisons? >To sum up: PM3 with Quad modem code would *rock*. > >Martin > > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > --- Clayton Zekelman Managed Network Systems Inc. (MNSi) 875 Ouellette Avenue Windsor, Ontario N9A 4J6 tel. 519-985-8410 fax. 519-258-3009 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0