October 2000 - USR-TC - mailman.xmission.com

(usr-tc) rebooting NMC with snmp
by Michael Fingerson 09 Oct '00

09 Oct '00

Does anyone know the oid's to reset a NMC card? I have tried snmpset hostname private .1.3.6.1.4.1.429.1.2.4.4 i 2 (force) snmpset hostname private .1.3.6.1.4.1.429.1.2.4.3 i 6 (software reset) I have been able to reset a dsp card with snmpset hostname private .1.3.6.1.4.1.429.1.1.7.1.1.5.# i 1 (force) snmpset hostname private .1.3.6.1.4.1.429.1.1.7.1.1.4.$ i 4 (reset) Michael Fingerson Network Services Engineer mjfinger(a)rconnect.com 416 South Broadway Rochester, MN 55904 (507) 536-0000 x106 http://www.rconnect.com RURAL CONNECTIONS - a OneMain.com company - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) WTB: USR Hiper Cards
by Steve Rivera -www.wrca.net 09 Oct '00

09 Oct '00

WR Communication Associates (WRCA) is looking to buy the following USR hardware: HIPER DSP Modem cards w/ nics. T1 or E1 Versions acceptable. HIPER ARC w/ nics Please email or call with available pieces or packages. Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr (www.isp-networkhardware.com) Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr (www.isp-networkhardware.com) Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 5

(usr-tc) USR MP/8I problem with EuroISDN
by Oleg Polegenko 09 Oct '00

09 Oct '00

Hello List, Does anybody of this list use USR MP/8I with EuroISDN? Does the lastest firmware (2.5.10) for MP/8I work with EuroISDN (DSS1 switching)? I can't do that. Will be grateful for any ideas. Thank you. Oleg Polegenko ISP S-NET Ltd phone: +380 5366 24095 mailto: oleg(a)s-net.net.ua http://www.s-net.net.ua - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) WTB: USR Hiper Cards
by Steve Monkhouse 08 Oct '00

08 Oct '00

Yeah Ive bought from Steve before, he's very professional.. and we had no problems.. ( And if he gets some E1 DSP's in, Ill be back for them too ! ) :-) Steve Monkhouse - Network Engineer --------------------------------------------------------------------- EtherTech Computer Services Ph : +61-3-9768-2665 Fx : +61-3-9768-2664 http://www.ethertech.com.au -----Original Message----- From: Dan Irvin [SMTP:dirvin@123.net] Sent: Monday, 9 October 2000 02:55 To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) WTB: USR Hiper Cards Has anyone done business with this outfit? What price did you agree on? Did things go smoothly? Thanks -Dan David DenHollander wrote: > I have new Hiper DSP sets how many you need and what are you paying? > > At 02:38 PM 10/6/00 -0400, you wrote: > >WR Communication Associates (WRCA) is looking to buy the following USR > >hardware: > > > >HIPER DSP Modem cards w/ nics. > >T1 or E1 Versions acceptable. > > > >HIPER ARC w/ nics > > > >Please email or call with available pieces or packages. > > > >Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr > >(www.isp-networkhardware.com) > >Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com > >Worldwide Provider of Network Hardware Since 1981. > > > > > > > > > > > > > > > > > > > >Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr > >(www.isp-networkhardware.com) > >Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com > > > >Worldwide Provider of Network Hardware Since 1981. > > > > > > > > > > > > > > > > > > > > > > > > > > > >- > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > David DenHollander > > (403)254-1100 Main > (403)201-2815 Fax > > List your equipment for free > http://www.adoptable.com/ > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) The connection for call id 219549253, on if slot:14/mod:23 was dr opped for user - after successful RADIUS authentication
by Scott Trautman 06 Oct '00

06 Oct '00

Hi, I seem to have seen this before, can't recall for the life of me what this ended up meaning. Sequence on this call: Sep 13 08:53:19 lkm-ha1 At 13:49:00, Facility "Auth Facility", Level "VERBOSE":: A call, call id = 219549253, has arrived on interface slot:14/mod:23 Sep 13 08:53:38 lkm-ha1 At 13:49:19, Facility "Auth Facility", Level "COMMON":: A call is established, call id 219549253, on interface slot:14/mod:23 Sep 13 08:53:38 lkm-ha1 At 13:49:20, Facility "Auth Facility", Level "COMMON":: The connection for call id 219549253, on if slot:14/mod:23 was dropped for user UNKNOWN Doing a trace (mon ppp), I see: User Name: [Prrrrbj ] Monitoring user Prrrrbj. Decode tracing started, press ESCAPE to stop; press X for hex tracing. ....Tracing for user "Prrrrbj"; Escape to stop... Outgoing PPP Data on interface: slot:14/mod:23 PAP ACK Outgoing PPP Data on interface: slot:14/mod:23 IPCP CFG_REQ COMPR_TYPE 00 2d 0f 00 NEW_ADDRS 9c 2e b9 01 Incoming PPP Data on interface: slot:14/mod:23 LCP TERM_REQ Outgoing PPP Data on interface: slot:14/mod:23 LCP TERM_ACK It's saying to me the client is <requesting> to be terminated (suicide?) All their settings appear to be correct...definately is set to "let server assign" the IP address-- Any hints here as to what's going on? I hate to have someone rip out their dialup networking if I don't have a good reason for it. Anyone seen this before Thanks!! Scott M. Trautman 800-482-4638 Global Dialog Internet 608-240-4638,4637fax 2810 Crossroads, STE LL2 scott(a)gdinet.com Madison WI 53718 <http://www.gdinet.com/> - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 8

(usr-tc) FS: USR Hiper / DSL
by Steve Rivera -www.wrca.net 03 Oct '00

03 Oct '00

WR Communication Associates (WRCA) has the following USR Hardware available: 3- 3Com HD Chassis w/ dual 70A (Blue Stickers) $650 4- USR Hiper DSP w/ nics $2900 each 5- USR Hiper NMC w/ nics $950 each 1- ALC w/ nic (DSL Total Control Cards) $600 1- Viper Modem (DSL Standalone) $550 Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr (www.isp-networkhardware.com) Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) bad ports
by Brian Burgmeier 03 Oct '00

03 Oct '00

We have several bad ports on one of our hiper arch cards. slot:15/mod:5,9 and 10 never pick up. I've tried resetting the card but no luck. When people hit these ports they get no answer. What is the command to busy out these ports so people roll over to the next available port? Is it possible to fix these cards or do I just need to send them into 3com? Thanks- Brian slot:15/mod:1 jennifer DIALIN PPP 27-SEP-2000 23:17:40 slot:15/mod:2 pcroft DIALIN PPP 27-SEP-2000 23:43:58 slot:15/mod:3 paulb DIALIN PPP 27-SEP-2000 23:15:06 slot:15/mod:4 azred DIALIN PPP 27-SEP-2000 23:44:21 slot:15/mod:6 mcrenaud DIALIN PPP 27-SEP-2000 22:35:51 slot:15/mod:7 angelo DIALIN PPP 27-SEP-2000 23:04:51 slot:15/mod:8 maverick DIALIN PPP 27-SEP-2000 22:00:06 slot:15/mod:11 bjsjim DIALIN PPP 27-SEP-2000 23:01:27 slot:15/mod:12 bishopc DIALIN PPP 27-SEP-2000 23:55:44 slot:15/mod:13 jen DIALIN PPP 27-SEP-2000 23:58:08 slot:15/mod:14 busch DIALIN PPP 27-SEP-2000 09:54:00 slot:15/mod:15 arin DIALIN PPP 27-SEP-2000 23:21:50 slot:15/mod:16 bass398 DIALIN PPP 27-SEP-2000 23:48:21 slot:15/mod:17 cabrams DIALIN PPP 27-SEP-2000 08:09:42 slot:15/mod:18 jprice DIALIN PPP 27-SEP-2000 06:49:30 slot:15/mod:19 chucha6 DIALIN PPP 27-SEP-2000 23:00:33 slot:15/mod:20 viking DIALIN PPP 27-SEP-2000 23:33:39 slot:15/mod:21 shameem DIALIN PPP 27-SEP-2000 21:40:34 slot:15/mod:22 bbonilla DIALIN PPP 27-SEP-2000 21:53:36 slot:15/mod:23 jamesr DIALIN PPP 27-SEP-2000 23:30:25 slot:15/mod:24 numbski - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

9 10

(usr-tc) Strange errors
by Brian 03 Oct '00

03 Oct '00

I am getting *alot* of these on one of our ARC's, any ideas? Oct 3 04:07:29 usr1ts2 At 09:07:29, Facility "IP", Level "UNUSUAL":: Sent ICMP TimeExceeded (code = 0) to 208.214.44.92 Oct 3 04:07:46 usr1ts2 At 09:07:46, Facility "IP", Level "UNUSUAL":: Sent ICMP TimeExceeded (code = 0) to 208.214.44.1 Oct 3 04:07:52 usr1ts2 At 09:07:52, Facility "IP", Level "UNUSUAL":: Sent ICMP TimeExceeded (code = 0) to 208.214.44.1 Oct 3 04:07:54 usr1ts2 At 09:07:54, Facility "IP", Level "UNUSUAL":: Sent ICMP TimeExceeded (code = 0) to 208.214.44.1 and on another arc I am seeing: Oct 3 07:04:14 usr2ts2 At 12:04:14, Facility "VTP", Level "UNUSUAL":: VTP Home Agent vtp_send_um_release_handle: Sending Release Handle to UM, (../../src/vtp_mpip_term.c: 1533). Oct 3 07:04:14 usr2ts2 At 12:04:14, Facility "VTP", Level "UNUSUAL":: Failed to CIP_DROP_CONNECTION_REQ (NO such connection(TCB)) , (../../src/vtp_mpip_term.c: 734). Oct 3 07:07:33 usr2ts2 At 12:07:32, Facility "VTP", Level "UNUSUAL":: VTP Home Agent vtpRemoveInterfaceFromConfigurator : Sending CFG_REMOVE_DYNAMIC_IF_MSG, (../../src/vtp_mpip_term.c: 1578). Oct 3 07:07:33 usr2ts2 At 12:07:32, Facility "VTP", Level "UNUSUAL":: VTP Home Agent vtp_send_um_release_handle: Sending Release Handle to UM, (../../src/vtp_mpip_term.c: 1533). Oct 3 07:07:33 usr2ts2 At 12:07:32, Facility "VTP", Level "UNUSUAL":: Failed to CIP_DROP_CONNECTION_REQ (NO such connection(TCB)) , (../../src/vtp_mpip_term.c: 734). Oct 3 07:08:25 usr2ts2 At 12:08:25, Facility "VTP", Level "UNUSUAL":: VTP Home Agent vtpRemoveInterfaceFromConfigurator : Sending CFG_REMOVE_DYNAMIC_IF_MSG, (../../src/vtp_mpip_term.c: 1578). Oct 3 07:08:25 usr2ts2 At 12:08:25, Facility "VTP", Level "UNUSUAL":: VTP Home Agent vtp_send_um_release_handle: Sending Release Handle to UM, (../../src/vtp_mpip_term.c: 1533). then on yet a third: Oct 3 04:45:47 usr3ts2 At 09:45:47, Facility "GWC Modem Driver", Level "UNUSUAL":: GWCMDM_AL, SLOT:4/CON:1 LINE_CLOSE event received Oct 3 04:45:48 usr3ts2 At 09:45:48, Facility "GWC Modem Driver", Level "UNUSUAL":: GWCMDM_AL, SLOT:1/CON:1 LINE_CLOSE event received Oct 3 04:45:50 usr3ts1 At 09:45:50, Facility "GWC Modem Driver", Level "UNUSUAL":: GWCMDM_AL, SLOT:5/CON:1 LINE_CLOSE event received Oct 3 04:45:55 usr3ts2 At 09:45:55, Facility "GWC Modem Driver", Level "UNUSUAL":: GWCMDM_AL, SLOT:3/CON:1 LINE_CLOSE event received Oct 3 04:45:56 usr3ts2 At 09:45:56, Facility "GWC Modem Driver", Level "UNUSUAL":: GWCMDM_AL, SLOT:2/CON:1 LINE_CLOSE event received Oct 3 04:46:04 usr3ts1 At 09:46:04, Facility "GWC Modem Driver", Level "UNUSUAL":: GWCMDM_AL, SLOT:4/CON:1 LINE_CLOSE event received Oct 3 04:46:11 usr3ts1 At 09:46:11, Facility "GWC Modem Driver", Level "UNUSUAL":: GWCMDM_AL, SLOT:3/CON:1 LINE_CLOSE event received this is all on 4.1.13 ----------------------------------------------- Brian Feeny, CCNP, CCDA signal(a)shreve.net Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) V92/V44
by Alan Martin 02 Oct '00

02 Oct '00

TO ALL: Anyone know if USR will be doing V.92/V.44 if so will It be a download to my TC boxes? Thanks Alan - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

6 11

(usr-tc) Always On / Dynamic ISDN
by Andy 02 Oct '00

02 Oct '00

Has anyone deployed the below on HiPER cards? http://www8.zdnet.com/pcmag/pctech/content/17/06/nt1706.001.html --- - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0